Continuous Shot - Kodak PIXPRO AZ362 User Manual

Continuous Shot

Follow the steps below to configure the Continuous
Shot Settings:
1. Press the to enter the Continuous Shot Menu.
2. Press the left/right to select the following 5 modes:
• Single
Capture a single shot only.
• Continuous Shot
Shoot at the rate of 5 pictures per second
with the maximum pixel setting. (Slow
down starting from No. 8)
• Cont.Shot-High Speed (VGA)
Continuously capture using VGA pixel,
up to 60pix/sec with a maximum of 120
images.
• Cont.Shot-Fast (4M)
Continuously capture 4MP images, up to
30pix/sec with a maximum of 60 images.
• Time-Lapse
Take pictures based on the preset interval
(30sec/1min/5min/10min).
3. Press the button to confirm the settings and
exit the menu.
4. Press the Shutter button to start continuous
shooting.
The flash is disabled in this mode in order to
achieve quick succession of shots.
41