Flash Mode
The Flash is used to illuminate a subject in low light
or for fill-in lighting to achieve better illumination of a
subject with pronounced shadows.
. Press the
Flash pop-up Button to pop up the
flash.
2. Press the right arrow button (
Flash Settings Menu.
2
) to enter the
. Press the left/right to select the following 5 modes:
•
Flash Auto
Camera flash goes off automatically
based on existing light conditions.
•
Force Flash
The flash will engage with each shot even
if there is enough available light to take
the photo without flash.
•
Slow Sync.
This allows for night scenery photos that
include people in the foreground. The
use of a tripod is recommended when
shooting with this setting.
•
Slow Sync. + Red-Eye
Use this mode for slow synchro shots with
red-eye reduction.
•
Red-Eye Reduction
The camera emits a brief pre-flash before
the picture is taken to reduce red-eye
effects.
4. Press the
button to confirm the settings and
exit the option.
9