Harbor Freight Tools 60322 Owner's Manual & Safety Instructions page 10

Maintenance Instructions
procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO pREVENT SERIOUS INJURy: Unplug the charger, disconnect any battery, and allow charger
to cool completely before performing any inspection, maintenance, or cleaning procedures.
TO pREVENT SERIOUS INJURy FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration occurs,
have the problem corrected before further use.
1. BEFORE EAcH USE, inspect the general
condition of the charger. Check for:
• loose hardware,
• cracked or broken parts,
• damaged electrical wiring or cable insulation, and
• any other condition that may
affect its safe operation.
Page 10 For technical questions, please call 1-800-444-3353.
2. AFTER USE, wipe external surfaces
of the tool with clean cloth.
3. WARNING! If the supply cord of this
charger is damaged, it must be replaced
only by a qualified service technician.
DO NOT OpEN cHARGER HOUSING,
NO USER-SERVIcEABLE pARTS INSIDE.
Item 60322