Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
REV 14h
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2008 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Advertisement
Table of Contents
Related Manuals for Harbor Freight Tools Cen-Tech 99857
Summary of Contents for Harbor Freight Tools Cen-Tech 99857
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. SAVE THIS MANUAL. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.
-
Page 2: Important Safety Information
SAVE THIS MANUAL CAUTION, used with the safety Keep this manual for the safety alert symbol, indicates a warnings and precautions, assembly, hazardous situation which, if operating, inspection, maintenance and not avoided, could result in cleaning procedures. Write the product’s minor or moderate injury. - Page 3 Electrical safety medication. A moment of inattention while operating Battery Chargers may a. Battery Charger plug must match result in serious personal injury. the outlet. Never modify the plug in any way. Do not use any b. Use personal protective adapter plugs with grounded equipment.
-
Page 4: Battery Charger Safety Warnings
These carry important safety the Battery Charger’s operation. information. If unreadable or missing, If damaged, have the Battery contact Harbor Freight Tools for a Charger repaired before use. Many replacement. accidents are caused by poorly Avoid contact with battery acid. If maintained Battery Chargers. - Page 5 Do not allow the Red and Black proximity to heart pacemaker could terminals of the Battery Charger or cause pacemaker interference or the vehicle battery cables to touch. pacemaker failure. In addition, Do not allow the Red cables to people with pacemakers should: touch the frame or any metal part of •...
-
Page 6: Grounded Tools: Tools With Three Prong Plugs
GROUNDING of electric shock. (See 3-Prong Plug and Outlet.) TO PREVENT The grounding prong in the plug is ELECTRIC SHOCK connected through the green wire AND DEATH FROM inside the cord to the grounding INCORRECT GROUNDING system in the tool. The green wire WIRE CONNECTION: in the cord must be the only wire Check with a qualified... -
Page 7: Extension Cords
Double insulated tools may be used condition. Always replace a damaged in either of the 120 volt outlets shown extension cord or have it repaired by in the preceding illustration. (See a qualified electrician before using it. Outlets for 2-Prong Plug.) Protect the extension cords from sharp objects, excessive heat, and Extension Cords... -
Page 8: Specifications
When unpacking, check to make sure that the item is intact and undamaged. If Bracket B (6) any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. INSTRUCTIONS FOR... - Page 9 Brackets A and B to grip the Battery Negative (-) terminal. Be sure all Charger. Attach to the compartment connections are tight. wall using two Self Tapping Screws Keep Output Wires (12) and Power (12). Cable (8) clear of fan, fan belt, Side View of Brackets Bracket A (9) pulleys and any other moving parts of...
-
Page 10: Tool Set Up
OPERATING INSTRUCTIONS 10. 1st stage: Constant Current. When the battery is severely discharged, Read the ENTIRE IMPORTANT the Charger applies Constant SAFETY INFORMATION Current. This stage speedily charges section at the beginning of this the battery while protecting against manual including all text under damage, loss of Hydrogen or even subheadings therein before set explosion. -
Page 11: Maintenance And Servicing
MAINTENANCE AND Never “Jump” or attempt to start the vehicle while the Battery Charger is SERVICING plugged in. Procedures not specifically Do not attempt to charge a damaged explained in this manual or “dead” battery with this tool. This must be performed only by a charger is designed to “top off”... -
Page 12: Troubleshooting
Troubleshooting Problem Possible Causes Likely Solutions Tool will not operate. LED 1. No power at outlet. 1. Check power at outlet. lights off. 2. Cord not connected. 2. Check that cord is plugged in. LED lights on, but tool does Loose or dirty connection at Check connections. -
Page 13: Assembly Diagram
ASSEMBLY DIAGRAM Item 99857 For technical questions, please call 1-888-866-5797. Page 13... -
Page 14: Limited 90-Day Warranty
LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.