Advertisement
3 Configuring the HG655a
You can access the Internet by use the following two methods:
Using the Embedded PPP Dial-Up Software of the HG655a to Get Online
Using the PPP Dial-Up Software of the Computer to Get Online
Please use the parameters provided by your internet service provider (ISP) for
configuration. If the configuration is wrong, you will not be able to access the
Internet.
Using the Embedded PPP Dial-Up Software of the
HG655a to Get Online
Step 1
Configure the HG655a to enable the embedded dial-up function
1. Connect the HG655a with your computer by using the Ethernet cable.
2. Start Internet Explorer on your computer and enter the http://192.168.1.1
in the address bar, and then press Enter.
3. The Login dialog box is displayed.
4. Enter the administrator name (admin by default) and password (admin
by default) in the Login dialog box, and then click OK.
Step 2
Configure the ATM PVC.
1. In the navigation tree, choose Basic > ATM.
2. Click New.
3. Enter VPI and VCI in the VPI/VCI text box provided by the Internet
Service Provider.
4. Select EoA from the DSL link type option button, and keep the default
settings of other parameters.
5. Click Submit.
Just keep the default settings for PTM.
Step 3
Enable the embedded dial-up function
1. In the navigation tree on the left of the Web-based configuration utility,
choose Basic > WAN.
2. Click New.
3. Select a PVC from the Layer2 interface drop-down combo box.
The HG655a supports ADSL/VDSL compliance uplink. When choose the ADSL
uplink mode, the name of PVC should be composed by the value of VPI and VCI.
When choose the VDSL uplink mode, the name of PVC should begin with ptm.
7
Advertisement
