(B) PROGRAMMING GROUPS INTO A SCENE - GENERIC LIGHTING
5. Use the push buttons to select the groups you
wish to import into the scene. Push a button a
second time to de-select a selected group.
38
TIP!
1. Press Prog/Edit
You can add groups into a scene built from individual channels. You can equally well
start with a group and then add or modify channels. The channels menu will always show
the scene data in the most detail, so any final adjustments to an imported group should
always be made using the Chans menu.
2. Press Scene
6. Groups are imported with all channels at
brightness level 255. Adjust the level of the group
with the trackball. Press STORE when finished
adding groups.
Need help?
Do you have a question about the Power Cue DMX and is the answer not in the manual?