Power Line Power Cue DMX User Manual page 16

3.
Select a group of keys to setup. Scroll
through the options to make your selection.
Repeat this procedure for other groups. Press
STORE and return to step 2.
These are the available functional modes. Except where the function is Global, it
applies only within the group:-
Latch and Add - A pressed key remains switched on until pressed a second time. All
keys may be switched on at any one time.
Flash and Add - A pressed key remains switched on only while it is pressed. All keys
may be switched on at any one time.
Latch and Swap - A pressed key remains switched on until pressed a second time.
Only one key may be switched on at any one time; pressing a second key switches off
the first one.
Flash and Swap - A pressed key remains switched on only while it is pressed. Only
one key may be switched on at any one time; pressing a second key switches off the
first one.
Latch and Solo, Global - A pressed key remains switched on until pressed a second
time. A solo key has no effect on keys already switched on. When a solo key is
switched on, all keys are disabled until the solo key is switched off.
Flash and Solo, Global - A pressed key remains switched on only while it is pressed.
A solo key has no effect on keys already switched on. When a solo key is switched, all
keys are disabled until the solo key is switched off.
•Press SetUp
•Press Keys
•Select a group of
keys
•Bump to the
desired option
•Press STORE
when finished
11