Configuration Files And Presets 6; Using The Default Configuration 6 - HHB FlashMic DRM85 User Manual

Configuration Files and Presets
Before you start exploring the features of FlashMic Manager, it is important to understand
some basic terminology and the concepts behind the use of presets.
Various parameters of the FlashMic's operation can be changed with FlashMic Manager.
A set of parameters is called a preset, and the FlashMic can hold up to 9 presets at any
time.
The FlashMic user can select whichever is appropriate for the recording application using
the menus.
A set of 9 presets is saved as a configuration file within the computer, and you may create
and name as many configuration files as you need. Configuration files are saved with a .cfg
filename extension. The entire configuration file will then be uploaded into the FlashMic,
giving it its 9 presets.
The FlashMic parameters which can be defined in a preset by FlashMic Manager are the
following:
PARAMETER
Preset Name
Record Mode
Pre-record Buffer
Record Level
High-pass Filter
Backlight
Filename
Battery Display
Characteristic
* Parameters marked 'Yes' can be subsequently changed within the FlashMic by the user,
provided that Configuration Changes were enabled in FlashMic Manager at the time of
configuration file creation.
Using the Default Configuration
The first time FlashMic Manager is run, a file Defaults.cfg will be created. It will be found
in the same folder containing the FlashMic Manager executable file (FlashMicManager.
exe). This file differs from other *.cfg files in that its purpose is to provide a convenient set
of default parameter values to aid the user in setting up his/her own personalised default
configuration file.
The parameter values provided by this default are:
Record Mode
Pre-record Buffer
Record Level
High-pass Filter
Backlight
Filename
Battery Display Characteristic
En.6
6-character text string
File type & sample rate
0 to 0 seconds.
8 steps from 5dB to 40dB
In/Out
3 options
3-character text string
Alkaline or rechargeable
PARAMETER
VALUES
VALUES
Linear, 48kHz sample rate
Off
AGC on
On
Energy saving mode
TRACK
Alkaline
USER ALTERABLE*
No
Yes
No
Yes
Yes
No
No
Yes