Compressor Protection - Honeywell RTH3100C Operating Manual

Operating Manual
Built-in compressor protection
Inside
75
Message flashes until safe restart
time has elapsed.
This feature helps prevent damage to the
Set To
compressor in your air conditioning or heat
75
pump system.
Damage can occur if the compressor is
restarted too soon after shutdown. This fea-
ture forces the compressor to wait for a few
Cool On
minutes before restarting.
During the wait time, the display will flash the
message Cool On or Heat On. When the safe
wait time has elapsed, the message stops
flashing and the compressor turns on.