1190 Antenna Assembly And Lcd Cover - Lenovo G400s Touch Hardware Maintenance Manual

Lenovo G400s/G405s/G400s Touch/G500s/G505s/G500s Touch
Hardware Maintenance Manual

1190 Antenna assembly and LCD cover

For access, remove these FRUs in order:
• "1010 Battery pack" on page 35
• "1020 Dummy card" on page 36
• "1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot
• "1040 Hard disk drive" on page 38
• "1050 Optical drive" on page 41
• "1060 DIMM" on page 43
• "1070 PCI Express Mini Card for wireless LAN/WAN" on page 44
• "1080 Fan assembly" on page 46
• "1090 Keyboard" on page 47
• "1100 Keyboard bezel" on page 52
• "1110 System board" on page 55
• "1150 Base cover, speakers, USB and power assembly" on page 65
• "1160 LCD front bezel" on page 70
Figure 19. Removal steps of antenna assembly and LCD cover
Peel off the adhesive tapes securing the antenna boards, release the cables from
the cable guide, and then remove the antenna assembly in the direction shown
by arrows
When installing: Route the antenna cables along the cable guides and secure the
antenna boards with adhesive tapes. As you route the cables, make sure that they
are not subjected to any tension. Tension could cause the cables to be damaged
by the cable guides, or a wire to be broken.
74
compartment cover" on page 37
a
.
a
a