Lenovo G400s Touch Hardware Maintenance Manual page 64

Lenovo G400s/G405s/G400s Touch/G500s/G505s/G500s Touch
Hardware Maintenance Manual
Figure 12. Removal steps of LCD unit (continued)
G400s: Release the antenna cables from the cable guides. Remove four screws
a
When installing:
• Route the antenna cables along the cable guides. As you route the cables,
• Make sure that the LCD connector is attached firmly and make sure that you
60
.
Step Screw (quantity)
a M2.5 × 4 mm, flat-head, nylok-coated
(4)
make sure that they are not subjected to any tension. Tension could cause the
cables to be damaged by the cable guides, or a wire to be broken.
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.
a
a
a
a
Color Torque
Black 2.38 ~ 2.5 kgfcm