LG 55WV70MS Owner's Manual page 17

(Continued from previous page)
3. Set up TV features.
On-screen setup menus control the features of the TV. Press MENU
SETTINGS on the Installer Remote to access the TV setup menus,
and then set Channel, Picture, Audio, Lock, Time, etc. options to the
desired configurations. See "Clonable TV Setup Menu Features" list on
page 15 and also notes below.
Note: If you intend to clone the PTC, remember that only one TV
source's clonable setup menu settings will be cloned. Thus, for a
clone programmer, the TV setup menu settings should be applicable
to either an analog channel or Aux input, while for a USB device / .tll
file, the TV setup menu settings should be applicable to the analog or
digital channel or Aux input to which the Target TV will be set during
the Teaching process.
Note: If desired and if appropriate depending on the cloning method
to be used (see "Cloning Methods" on page 15), you can run Auto
Tuning (see step 4) prior to completing this step.
4. (Optional) Run Auto Tuning.
Note: If you intend to use a USB memory device / .tlx file
for cloning purposes, DO NOT run Auto Tuning. If you
Teach a .tlx file with an auto-tuned/edited Channel Map to
a Target TV, this will put the Target TV in FTG Mode via
CPU. Proceed to step 7 to verify the TV setup. (Steps 5
and 6 are not applicable for .tlx files.)
If you run Auto Tuning with the intention to clone the resulting
Channel Map, you must use a USB memory device / .tll file or a
clone programmer for this cloning purpose.
a) To search for all available analog and digital channels, go to the
Channel Menu, select the Auto Tuning option, and follow the
on-screen instructions.
b) Use the Channel Edit option in the Channel Menu to edit the channel lineup, as
necessary, to include only free to guest (non-encrypted) channels.
• Add/delete channels per your system requirements.
• Use the Channel Label option in the Channel Menu to select the appropriate
trademark/icon for each channel's Channel-Time on-screen display. Icons are
available for familiar channels, such as ABC, CBS, NBC, etc. Identifiable labels
(icons) should enable the end user to readily know what common networks are
available.
Note: If you intend to clone the PTC and Installer Menu item 103 ATSC TUNE MODE
is set for Physical Channel tuning (default and recommended setting), channels with
minor channel numbers higher than 255 will not transfer correctly in step 5. If item 103
is set for Virtual Channel tuning and either the major or minor channel numbers are
higher than 255, the channel(s) will not transfer correctly in step 5.
Note: If you intend to clone the PTC, you can add the channel icons in this step or
as described in step 6. Also in step 6, you can add custom text labels for channels
without icons.
206-4214
Custom Master TV Setup (Cont.)
PICTURE
LOCK
Use the TV setup menus to set the TV
features to the desired configuration
(Optional) Use Channel Menu options
to run Auto Tuning, edit channels, and
AUDIO CHANNEL
OPTION INPUT SmartShare
for the end user.
CHANNEL
Move
• Auto Tuning
• Manual Tuning
• Channel Edit
• Channel Label
select channel icons.
(Continued on next page)
TIME
OK
17