Figure 5. Removal steps of hard disk drive (continued)
Detach the HDD connector in the direction shown by arrow
hard disk drive from the slot in the direction shown by arrow
When installing: Make sure that the HDD connector is attached firmly.
Remove the screws
4
Step
Screw (quantity)
M3 × 3 mm, flat-head, nylok-coated (4)
4
HDD_BRK to module
When installing: Make sure that the HDD connector is attached firmly.
Lenovo Z410/Z510/Z510 Touch
, then take out the metal frame.
. Remove the
2
.
3
Color
Torque
White
3.0+/-0.3 kgf/cm
47