Lenovo ThinkPad Hardware Maintenance Manual page 55

Cable routing: When you install the antenna assembly, route the cables as shown in the following
illustration. As you route the cables, make sure that they are not subjected to any tension. Tension could
cause the cables to be damaged by the cable guides, or a wire to be broken.
a
P-sensor antenna (black)
b GPS antenna (green)
Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several kinds.
When you replace the base cover, apply the following labels:
10
Homologation label
Following labels need to be peeled off from the old base cover, and need to be put on the new base cover.
1
Israel Homo Wireless LAN/Bluetooth label
2
Non Encryption label
3
Israel Homo 3G label
4
Indonesia Kit label
5
China Wireless WAN label
6
China Wireless WAN label (for models with Huawei
EM660 card)
7
Wireless WAN MAC address label
8
GEO label (for China)
For the location of each label, refer to the following figure:
11
Serial number label
9
GEO label (for others)
12
Brazil Anatel 3G label
13
Brazil Anatel Wireless LAN/Bluetooth label
14
SIRIM 3G label
15
SIRIM Wireless LAN/Bluetooth label
16
Indonesia Postel Wireless LAN/Bluetooth label
17
Indonesia Postel 3G label
.
Chapter 7 Removing and replacing a FRU
49