Specifications; Staple Selection; Accessories; Standard Accessories - Hitachi N 5024A2 Instruction And Safety Manual

English

SPECIFICATIONS

Operating pressure
Dimensions
Length × Height × Width
Weight
Staple capacity
Air consumption

STAPLE SELECTION

Be sure to use only the genuine
HITACHI staples for the N5024A2,
N5021A. The use of any other staples
can result in tool malfunction and/or
staple breakdown, leading to serious
injuries.
Only staples shown in the Table below can
be driven with this Stapler.
Dimensions of staples for N5024A2
16 Gauge 1"
Crown staple
.917"
(23.3mm)
WARNING
Min. Max.
.057"
(1.45mm)
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
14-3/8" × 9-13/16" × 3"
(365 mm × 250 mm × 76 mm)
4.7 lbs. (2.1 kg)
150 Staples
3
.40 ft /cycle at 100 psi
(1.1 ltr/cycle at 6.9 bar)
(1.1 ltr/cycle at 7 kgf/cm
Dimensions of staples for N5021A
16 Gauge
15/16"
Crown staple
.807"
(20.5mm)

ACCESSORIES

Accessories other than those shown
below can lead to malfunction and
resulting injuries.

STANDARD ACCESSORIES

1 Safety glasses
— 10 —
2
)
2
)
Min. Max.
.052"
(1.33mm)
WARNING
1
1