Interpreting Leds; Operation Alarms - Sagem F@ST 1200 User Manual

All the troubleshooting procedures described below were carried out in
Windows    XP. The procedures in other Windows operating systems
(98, ME and 2000) may present slight differences.
A.2 Interpreting LEDs
The four LEDs on the SAGEM F@st™ 1200 reflect the status of the various interfaces.
When the SAGEM F@st™ 1200 is powered up, the PWR LED lights first
followed by the other three LEDs, then these last three go off in turn.
A.3 Operation alarms
These alarms reflect events occurring while the SAGEM F@st™ 1200 is operating. They can be
diagnosed using the green LEDs on the front panel of the unit or via the icon in the task bar.
Front panel green LEDs
The table below gives the meaning of the various LEDs.
Marking
On steady
Blinking slowly
Off
Sagem Communication document. Reproduction and disclosure prohibited
PWR
Power supply Activation/Activity
presence on USB link
_
No power supply No activity on USB link
Appendix A - Troubleshooting
USB ETH
Activity on ETH link
_
In pace with traffic
On activity on ETH link
SAGEM F@st™ 1200 User Guide - 252336343-01
LINE
ADSL line
synchronized
ADSL synchronizing
(see section A.3.1)
Line not connected
Page A-3