setting up your refrigerator
REVERSING THE REFRIGERATOR DOOR
Before you reverse the refrigerator door, make sure to unplug the refrigerator.
If this operation is not performed by After sales service, it is not covered by the
WARNING
warranty.
Required Tools
Phillips Head
Flat Head
Driver (+)
Driver (-)
1. Remove 4 screws on the Top cover of the refrigerator.
Make sure your refrigerator
is unplugged before handling
WARNING
electrical wires.
2. Remove the Top cover. Make sure to disconnect the wire underneath the
Top cover.
Be careful not to damage the electrical wires when removing the Top cover.
CAUTION
12_
setting up
Not provided
10mm
11mm
Socket
Wrench
Wrench
(for hinge
(for bolts)
shaft)
Additional part
3/16"
Top Left
Allen Wrench
Hinge Cover
(for middle
(Underneath the
hinge)
Top Cover)