Reversing The Refrigerator Door - Samsung Refrigerator User Manual

REVERSING THE REFRIGERATOR DOOR

Before you reverse the refrigerator door, make sure to unplug the refrigerator.
WARNING
If this operation is performed by After sales service, it is not covered as the
warranty service.
Required Tools (Not provided)
Phillips Head Flat Head
Driver (+) Driver (-)
1. Remove 2 screws on the top of the refrigerator.
2. Remove the plastic cover and make sure to disconnect the wire connected to it.
After removing the plastic cover, check the parts for reversing the door.
Be careful not to damage the electrical wires when removing the plastic cover.
CAUTION
3. Disconnect the wires and then remove 3 bolts.
Make sure your refrigerator is unplugged before handling electrical wires.
WARNING
10mm 8mm
Socket Socket
Wrench Wrench
(for bolts) (for bolts)
4mm Hex
Spanner Wrench
(for hinge shaft) (for bottom
hinge shaft)
setting up
_11