Presetting Stations; Listening To Radio; Using The Special Effects Remote Control Buttons - Samsung HT-E6530 User Manual

Media Play
Encoding - which changes by language
or by geographical area - modifies
how the product sorts, arranges, and
Encoding presents files or tracks, displays dates,
etc. Select Encoding to change the
encoding to match your language or
geographical area.
Displays media file and content
Information
information.
| NOTE |
\ Depending on the disc or storage device, the Tools menu
may differ. All options may not be displayed.

Listening to Radio

Using Buttons on the Remote Control
1 . Press the FUNCTION button to select FM.
2 . Tune to the desired station.
• Preset Tuning 1 : Press the 5 button
to select PRESET and then press the
TUNING/CH (,.) button to select the
preset station.
- Before you can tune to preset stations,
you must add preset stations to the
product's memory.
• Manual Tuning : Press the 5 button
to select MANUAL and then press the
TUNING/CH (,.) button to tune to a
lower or higher frequency.
• Automatic Tuning : Press the 5 button
to select MANUAL and then press and
hold the TUNING/CH (,.) button to
automatically search the band.
Setting Mono/Stereo
Press the MO/ST button.
• Each time the button is pressed, the sound
switches between STEREO and MONO.
• In a poor reception area, select MONO for a
clear, interference-free broadcast.
50
|
English

Presetting Stations

Example : Presetting FM 89.10 into memory.
1 . Press the FUNCTION button to select FM.
2 . Press the TUNING/CH (,.) button to
select <89.10>.
3 . Press the TUNER MEMORY button.
• NUMBER flashes on the display.
4 . Press the TUNER MEMORY button again.
• Press the TUNER MEMORY button before
NUMBER disappears from the display on its
own.
• After you press the TUNER MEMORY
button, NUMBER disappears from the
display and the station is stored in memory.
5 . To preset another station, repeat steps 2 to 4.
• To tune to a preset station, press the
TUNING/CH (,.) button.
Using the Special Effects Remote
Control Buttons
SOUND EFFECT Function
Lets you select a mode that optimizes the sound.
1. Press the SOUND EFFECT button.
2. Press the ▲▼ button to select the desired mode:
DSP, Dolby Pro Logic II or SFE Mode.
3. Press the ◄► buttons to select the desired sound
effect.
K
DSP
MP3 Enhancer  Power Bass  Virtual 7.1  Off
• MP3 Enhancer : Helps enhance your sound experience
(ex. mp3 music). You can upscale your MP3 level sound
(24 kHz, 8bit) to CD level sound (44.1 kHz, 16bit).
• Power Bass : Increases the volume level of bass tones
and provides thudding sound effects.
• Virtual 7.1 : Applies the 7.1 CH sound effect using the
5.1 CH speaker system.
• Off : Select this for normal listening.
SOUND
EFFECT