Basic Features
Changing the Picture Options
¦
Advanced Settings
(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including
colour and contrast.
✎
In PC mode, you can only make changes to
Contrast, Gamma and White Balance.
Advanced Settings
Black Tone
Dynamic Contrast
Shadow Detail
Gamma
RGB Only Mode
Colour Space
White Balance
Black Tone (Off / Dark / Darker / Darkest)
■
black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High)
■
the screen contrast.
Shadow Detail (-2~+2)
■
images.
✎
Disabled under PC mode.
Gamma
: Adjust the primary colour intensity.
■
RGB Only Mode (Off / Red / Green / Blue)
■
adjust Colour or Tint of Red, Green or Blue for the
picture from an external device (DVD player, home
theatre, etc.).
Colour Space (Auto / Native)
■
colours available to create the image.
: Adjust the colour temperature for a
White Balance
■
more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each colour's
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default settings.
Flesh Tone
: Emphasize pink "Flesh Tone."
■
Edge Enhancement (Off / On)
■
boundaries.
✎
Available when the picture mode is set to
Standard and Movie and when the external input
is set to HDMI or Component.
✎
Some external devices may not support this
function.
14
English
Dynamic
: Off
►
: Medium
: 0
: 0
: Off
: Native
▼
U Move E Enter R Return
: Select the
: Increase the brightness of dark
: You can
: Adjust the range of
: Emphasize object
Picture Options
✎
In PC mode, you can only make changes to the
Tone, Size and Auto Protection Time.
Colour Tone
Size
Digital Noise Filter
MPEG Noise Filter
HDMI Black Level
POWER
P
Film Mode
Auto Protection Time : 2 hours
Colour Tone (Cool / Normal / Warm1 / Warm2)
■
✎
Warm1
picture mode is Dynamic.
✎
Settings can be adjusted and stored for each
external device connected to an input on the TV.
Size
: Your cable box/satellite receiver
■
MEDIA.P
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
: Adjust
16:9 : Adjusts the picture size to 16:9 for
DVDs or wide broadcasting.
Wide Zoom: Magnifies the picture size more than 4:3.
✎
Adjusts the Position by using
Zoom: Magnifies the 16:9 wide pictures vertically to fit
the screen size.
✎
Adjusts the Position or Size by using
4:3 : The default setting for a movie or normal
broadcasting.
✎
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and centre
of the screen may cause image retention(screen
I-II
burn) which are not covered by the warranty.
DUAL
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
✎
NOTE
x
After selecting
or Component (1080i / 1080p) mode: Adjusts the
Position or Size by using ▲, ▼, ◄, ► button.
x
Depending on the input source, the picture size
options may vary.
Picture Options
: Normal
: 16:9
: Auto
: Auto
: Normal
: Off
▼
U Move E Enter R Return
or Warm2 will be deactivated when the
▲, ▼ buttons.
SLEEP
Screen Fit in HDMI (1080i / 1080p)
Colour
►
▲, ▼ button.
E.SAVING