Kärcher T 350 Operator's Manual page 6

APPLICATION DIRECTIONS
Suggested Settings for Typical Applications
Horizontal Wood and Decks
• Adjust height of the spray
head clockwise.
• Open the air flow vents.
Vertical Wood, Siding and Facades
• Connect the T-Racer directly
with the trigger gun.
• Adjust height of the spray
head clockwise.
• Close the air flow vents.
Do not use on windows.
6
Horizontal Tile, Concrete and Stone
• Adjust height of the spray
head counterclockwise.
• Open the air flow vents.
Vertical Tile, Concrete and Stone
• Connect the T-Racer directly
with the trigger gun.
• Adjust height of the spray
head counterclockwise.
• Close the air flow vents.
Cleaning of vertical surfaces:
Always hold Trigger Gun and T-Racer with both hands.
Do not reach under the edge of the T-Racer while the device is in operation.