Craftsman 247.374810 Operator's Manual page 9

3.
Followthe stepsbelowto completehandleassembly:
a. Pullupwardon the handleuntil holesinlowerhandle(shownin
Figure 3deckcutaway) l ineup with holesinhandlebracket. S ee
Figure 4.
NOTE: Whenpullingupwardon handle,makesureto not pullhandleall the
wayout.
b. Insertthe T-boltsremoved in stepearlierthroughthe handle
brackets a ndlowerhandle andtightensecurely to secure the handle
inplace.SeeFigure 4.
c. Reattach wingnutsandcarriage boltsremoved earlierinto lower
holesof handle asshownin Figure 5.
Theropeguideisattached to the rightsideof the upperhandle.Loosen the
wingknobwhichsecures the ropeguide.Refer t o Figure 6.
a. Holdbladecontrolagainst u pperhandle.
b. Slowlypullstarterropehandlefromengineandslipstarterropeinto
the ropeguide.SeeFigure 6.
c. Tighten ropeguidewingknob.
d. Use cabletiesto secure bladecontrolcableto lowerhandle.
4.
Figure 5
Figure4
Figure6
9