Page 1
SCHEDULE TIMER MODELS DST301BA61 Thank you for purchasing Daikin’s schedule timer. For proper usage, read this manual carefully before using this unit. This manual will help you with anything you can not understand or should anything go wrong with the unit during use.
Be sure operation. only to use accessories made by Daikin Please instruct the customer on how to operate which are specifically designed for use the unit and keep it maintained.
Page 5
CAUTION NOTE After a long use, check the unit stand and Never press the button of the remote con- fitting for damage. troller with a hard, pointed object. If they are left in a damaged condition, the The remote controller may be damaged. unit may fall and result in injury.
CONTENTS SAFETY CONSIDERATIONS Change and cancellation of no. of ...1 programmed time..........7 FEATURES AND FUNCTIONS ..3 Manual operation ..........9 NAMES AND FUNCTIONS OF Operation control code ........9 Error diagnosing function........9 OPERATING SECTION .......4 QUESTION AND ANSWER .....10 OPERATION ..........5 SPECIFICATIONS .......12 Setting present time ........5 Specifications..........12...
NAMES AND FUNCTIONS OF OPERATING SECTION (Fig. 1, 2) UNIFIED OPERATION BUT- DISPLAY “ ” (PRESENT TIME) TON “ ” Displays the present day of the week Press this button to perform the unified and time. operation regardless of the No. of pro- grammed time.
Press the BUTTON FOR SELECTING DAYS OF A WEEK. TIMER ON BUTTON “ ” Each time the button is pressed, the day display shifts to the right. Press this button to set the present time and the programmed time. (NOTE) •...
Setting no. of programmed time (1) Setting programmed time (Fig. 4) Set the programmed time of system start 1 by using the HOUR/ (Example) Time No. 5 (to be programmed MINUTE BUTTON. Each time the only when used in conjunction HOUR/MINUTE BUTTON is with the central remote con- troller)
(2) Set the next day of the week. • The flashing display goes off, and the Set the day of the week to Tuesday, and No. of programmed time of the present copy the program of the previous day day is displayed. Then the operation (Monday).
Page 11
Press the BUTTON FOR Press the PROGRAM CAN- SELECTING DAYS OF A WEEK, CELING BUTTON, and cancel the and set the day of the week to be programmed time. If you press it changed. The set No. of pro- again, display returns to the origi- grammed time of the day of the nal state.
(NOTES) Press the UNIFIED OPERA- • For current settings, contact your DAIKIN TION BUTTON, and the OPERA- dealer. TION LAMP turns on. • To change settings, contact your DAIKIN dealer.
Opera- Malfunc- Contents of mal- Address failure of tion lamp tion code function schedule timer. Fixes Failure of PC board The following of schedule timer. causes are possible. Fixes Check each one. The following 1. Do the control Turn off causes are possi- range addresses ble.
Page 14
Yes, it is possible. The following causes Example: are possible. Start operation at 1. The TIME NO. is not 5:00 a.m. on Sunday displayed when Stop operation at The TIME NO. is using the schedule Is it possible to 6:00 p.m. on Monday not displayed.
SPECIFICATIONS Specifications Display of time 12-hour digital display Clock cycle type Quartz clock type Within ±30 sec./month (environmental temperature from Clock accuracy 15°C to 35°C) Two pairs of programmed time for both system start and Timer programming system off can be set in units of minute for each day of the week Approximately 48 hours for a single occurrence of power Power failure compensation time...