Table of Contents
Advertisement
Source IP Wildcard
Enter the mask of the new source IP
Mask:
address.
VLAN ID:
Enter the VLAN ID to which the IP ad-
dress is attached in IPv4-Based ACE. The
range is from 1-4094.
802.1p Value:
Enter the 802.1p value. The range is
from 0-7.
Ethertype Value:
Enter the Ethertype value. The range is
from 05DD-FFFF.
ICMP:
Select Any, Protocol ID, or Select from
the List in drop down menu.
• Protocol ID – Enter the protocol in the
ACE to which the packet is matched. The
range is from 0-255.
• Select from List– Select the ICMP from
the list in the provided field.
ICMP Code:
Enter the ICMP code. The range is from
0-255.
Source Port:
Select Single or Range from the list. En-
ter the source port that is matched to the
packets. The range is from 0-65535.
Destination Port:
Select Single or Range from the list.En-
ter the destination port that is matched
to the packets. The range is from
0-65535.
Type of Service:
Enter the DSCP. The range is from 0-63.
Click Apply to save the changes to the system.
100
Hide quick links:
Advertisement
Table of Contents
