Daily Use - Electrolux GK58TSCN User Manual

6 electrolux
12
HEAT SETTING DISPLAYS
Display
-
+ digit
/ /
OPTIHEAT CONTROL (3 STEP
RESIDUAL HEAT INDICATOR)
Warning! /
burns from residual heat!

DAILY USE

Warning! Refer to the Safety chapters.
ACTIVATION AND DEACTIVATION
Touch for 1 second to activate or deac-
tivate the appliance.
AUTOMATIC SWITCH OFF
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated (
• You do not set the heat setting after you
activate the appliance.
• You spill something or put something on
the control panel for more than 10 sec-
onds, (a pan, a cloth, etc.). An acoustic
signal sound some time and the appli-
ance deactivates. Remove the object or
clean the control panel.
• You do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the appliance deacti-
vates. See below.
• The relation between heat setting and
times of the Automatic Switch Off func-
tion:
•
, - — 6 hours
Sensor field
The cooking zone is deactivated.
The cooking zone operates.
The function operates.
The Automatic Heat Up function operates.
There is a malfunction.
OptiHeat Control (3 step Residual heat indicator) : continue cook / stay
warm / residual heat.
Lock / The Child Safety Device operates.
The Automatic Switch Off function operates.
/ The risk of
To activate and deactivate the outer rings.
Description
OptiHeat Control shows the level of the re-
sidual heat.
•
- — 5 hours
•
- — 4 hours
•
-
THE HEAT SETTING
Touch the control bar at the heat setting.
Move your finger along the control bar to
change the setting. Do not release before
you have a correct heat setting. The display
shows the heat setting.
).
ACTIVATION AND DEACTIVATION OF
THE OUTER RINGS
You can adjust the surface you cook to the
dimension of the cookware.
To activate the outer ring touch the sensor
field / . The indicator comes on.
Do the procedure again to deactivate the
outer ring. The indicator goes out.
Function
— 1.5 hours