Troubleshooting - Electrolux GK58TSCN User Manual

Table of Contents

Advertisement

10 electrolux
2. Clean the appliance with a moist cloth
and some detergent.

TROUBLESHOOTING

Problem
You cannot activate or operate
the appliance.
An acoustic signal sounds and
the appliance deactivates.
An acoustic signal sounds
when the appliance is deacti-
vated.
The appliance deactivates.
The residual heat indicator
does not come on.
The Automatic Heat Up func-
tion does not operate.
You cannot activate the outer
ring.
The sensor fields become hot.
There is no acoustic signal
when you touch the panel sen-
sor fields.
comes on.
comes on.
3. At the end rub the appliance dry
Possible cause
The appliance is not connec-
ted to an electrical supply or it
is connected incorrectly.
You touched 2 or more sensor
fields at the same time.
The STOP+GO function oper-
ates.
There is water or fat stains on
the control panel.
You put something on one or
more sensor fields.
You put something on the sen-
sor field
.
The cooking zone is not hot
because it operated only for a
short time.
The cooking zone is hot.
The highest heat setting is set.
The cookware is too large or
you put it too near to the con-
trols.
The signals are deactivated.
The Automatic Switch Off op-
erates.
The Child Safety Device or the
Lock function operates.
with a clean cloth.
Check if the appliance is cor-
rectly connected to the electrical
supply (refer to connection dia-
gram).
Activate the appliance again and
set the heat setting in less than
10 seconds.
Touch only one sensor field.
Refer to the chapter "Daily Use".
Clean the control panel.
Remove the object from the
sensor fields.
Remove the object from the
sensor field.
If the cooking zone operated
sufficiently long to be hot, speak
to the service centre.
Let the cooking zone become
sufficiently cool.
The highest heat setting has the
same power as the Automatic
Heat Up function.
Activate the inner ring first.
Put large cookware on the rear
cooking zones if necessary.
Activate the signals (refer to
"OffSound Control").
Deactivate the appliance and
activate it again.
Refer to the chapter "Daily Use".
Remedy

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents