Making Minor Adjustments To The Doors - Samsung Refrigerator User Manual

LEVELLinG THE
rEfriGEraTor
Now that the doors are back on the refrigerator, you
will want to make sure the refrigerator is level so you
can then make final adjustments.
If the refrigerator is not level, it will not be possible to
get the doors perfectly even.
The front of the refrigerator is also adjustable.
When the Freezer door is lower than
the fridge
Insert a flat-blade screwdriver into a notch on the
Leg, turn it clockwise or counter clockwise to level
the freezer.
screw Driver
When the Freezer door is higher than
the fridge
Insert a flat-blade screwdriver into a notch on the
Leg, turn it clockwise or counter clockwise to level
the freezer.
Leg
Refer to the next section for the best way to
make very minor adjustments to the doors.
10_ setting up
Leg
screw Driver
MaKinG Minor aDJUsTMEnTs
To THE Doors
Remember, a level refrigerator is necessary for
getting the doors perfectly even.
If you need help, review the previous section on
levelling the refrigerator.
When the door of the freezer is
higher than the fridge
In the process for adjusting both the doors is the
same. Open the doors and adjust them, one at a
time, as follows:
1. Unscrew the
nut from the
1
lower hinge until it
reaches the upper
end of the bolt .
2
When you
release the nut
the Allen wrench provided
2
bolt in a counter-clockwise direction.
You should then be able to unscrew the nut
1
with your fingers.
2. Adjust the
height difference
between the doors
by turning the
bolt clockwise
2
or counter
clockwise .
When you turn clockwise
will move up.
3. After adjusting the
doors, turn the
nut clockwise
1
until it
reaches the lower
end of the bolt,
then tighten the
bolt again with the wrench
place .
1
If you do not secure the nut firmly, the bolt
may release.
adjustment part
3
1
1
, make sure that you use
3
to loosen the
3
2
, the door
3
1
to fix the nut in
3
Wrench
2
Bolt
nut
Wrench
Bolt
Wrench
2
Bolt
nut