Set-Up & How To Brew - Keurig MR.COFFEE BVMC-KG2 User Manual

SET-UP & hOw TO bREw
1. Place Brewer upright on a flat surface, remove
protective sheet and plug into outlet.
2. DO NOT remove or puncture the foil lid of
the K-Cup portion pack.
®
3. Lift front handle of the brewer to insert
a K-Cup.
4. Place chosen K–Cup into the K-Cup
Assembly Housing.
CAUTION: There are two sharp needles
that puncture the K-Cup, one above
the K-Cup Holder and the other in the
bottom of the K-Cup Holder. To avoid risk
of injury, do not put your fingers in the
K-Cup Housing Assembly.
6
5. Lower the handle completely and firmly
to close the Lid and puncture the K-Cup
portion pack.
6. Depress the water marking button and the
hot water tank will open automatically.
7. Fill the Hot Water tank with filtered or
bottled water up to the desired fill level
without exceeding the max fill line.
Note: Any spills outside the fill area
will flow to the drip tray.
8. Close the Hot Water Tank cover.
7