HT-DL70/DL80-GB-noRDS
Listening to the Radio
GB
Remote
Press the Tuner(Band)
Control
button.
Unit
•
The selection toggles back
and forth between "FM" "AM"
each time the Tuner(Band)
button is pressed.
Press the Function button to
Main
select the desired band (FM,
Unit
AM).
To Listen in Mono/Stereo
Press the MO/ST button. (FM only)
•
The selection toggles back and forth between "STEREO" and "MONO"
each time the MO/ST button is pressed.
•
In a poor reception areas, select Mono mode for a clear, interference-free
broadcast.
37
11/8/02
10:11
Page 37
You can listen to the chosen band (FM, AM broadcast stations) by using either the
automatic tuning or manual tuning operation.
1
1
2
Select a broadcast station.
When the
Auto Station 1
broadcast station is selected.
Hold in the
Auto Station 2
begins, and then stops when a station is tuned in.
Press the
Manual Station
station. The frequency changes incrementally in either
direction each time the corresponding button is pressed.
2
Select a broadcast station.
Press the Stop (
Auto Station 1
mode. Then press the
station stored in the preset. See the instructions on the
next page to preset stations.
Auto Station 2
Press the Stop (
mode on the front panel. Then hold in the
button to make the unit begin automatically searching for
broadcast stations.
Manual Station
Press the Stop (
on the front panel. Press the
to the desired station. The frequency changes
incrementally in either direction each time the
corresponding button is pressed.
Audio
MO/ST
button is pressed, a preset
button. Automatic searching
button to tune to the chosen
) button to select the PRESET
button to select a
) button to select the MANUAL
) button to select the MANUAL mode
button to tune