Henny Penny BCF-24 Specification Sheet

PROJECT
BCF-24 Blast Chiller/Freezer
Compact blast chiller/freezer Model BCF-24
with adjustable racking, 24 lbs (11 kg) max
capacity.
Standard Features
• Stainless steel cabinet with
polyurethane foam injected
insulation.
• 3 pairs of removable, adjustable
shelf runners accept full-size steam
table pans and grids.
• Touch-pad controls feature simple
icons and a large digital display.
• Temperature displays can be set in
°F or °C.
• The unit's operations can be
controlled either by a timer or by
the multi-point Frigiprobe that
automatically controls food chilling.
• Automatic holding mode at end of
chilling cycle.
APPROVED APPROVED AS NOTED
AUTHORIZED SIGNATURE
© 2006 Henny Penny Corporation, Eaton, OH 45320 USA Revised 12/04/07
QUANTITY
General Information
Henny Penny's BCF-24 blast
chiller/freezers cool up to 33 lbs. (11
kg) of hot food from 140°F (60°C) to
40°F (5°C) in less than 4 hours for
later storage, serving or
rethermalization. Units are also
capable of blast freezing 19s lbs. (6.5
kg) from 140°F (60°C) to 0°F (-18°C)
in 4 1/2 hours.
Foods rapidly chilled spend less
time in the "danger zone" between
160-40°F (71-3°C), assuring food
safety with minimal energy
consumption.
Foods also store longer, taste
better when reheated and have
colors, flavors and textures preserved
longer since very little moisture is lost
through evaporation.
The BCF-24 features 3 pairs of
removable, adjustable shelf runners
that accept standard steam table
pans and grids. Additional runners
are available. Fan is positioned on
the rear wall to accommodate side-
• Self-contained evaporation, no
drain or attachments needed.
• De-icing mode rapidly removes
excess ice or water Self-diagnostic
system identifies and displays
service requirements.
• Designed with coved corners,
round door gasket and removable
shelf runners and supports for easy
cleaning.
• Air-cooled 3/4 hp condensing unit.
• R404A refrigerant, CFC-free.
• Adjustable leveling legs.
RESUBMIT
DATE
ITEM NO
MODEL
wall racking.
Unit includes stainless steel
temperature probe with 4 sensors that
enable the core temperatures of
different types of food products to be
measured accurately. Unit
automatically stops freezing/chilling
cycle when desired core temperature
level is reached.
Unit can also be operated in Timer
mode that ends the chilling cycle after
a desired time period and then
maintains temperature automatically.
The BCF-24 is cooled by a built-in
3/4 hp air-cooled condensing unit.
Models are available with right or
left-hinged doors. Compact size
requires minimal floor or counter
space.
Options, accessories
Door hinge
Right OR
Left
Henny Penny Corporation
PO Box 60 Eaton OH 45320 USA
+1 937 456.8400 800 417.8417
+1 937 456.8434 Fax 800 417.8434 Fax
www.hennypenny.com
BCF-24