Table of Contents
Advertisement
Basic Functions
Listening to radio
Using buttons on the Remote Control
1.
Press the
FUNCTION button to select FM
band.
2.
Tune in to the desired station.
Automatic Tuning 1
•
MODE button to select PRESET and then press
TUNING (
) buttons to select the preset
station.
•
Automatic Tuning 2
MODE button to select AUTO and then press
and hold the TUNING (
automatically search for active broadcasting
stations.
Manual Tuning
: Press the TUNING MODE
•
button to select MANUAL and then briefly
press the TUNING (
decrease the frequency incrementally.
Using buttons on the product
1.
Press the
TUNER button to select FM band.
2.
Select a broadcast station.
Automatic Tuning 1
•
button to select PRESET and then press the
[ ] buttons to select the preset station.
•
Automatic Tuning 2
button to select AUTO and then press and hold
the [ ] buttons to automatically search the
band.
Manual Tuning
: Press the STOP ( @ ) button
•
to select MANUAL and then press the [ ]
buttons to tune in to a lower or higher
frequency.
Setting Mono/Stereo
Press the MO/ST button.
Each time the button is pressed, the sound
•
switches between STEREO and MONO.
In a poor reception area, select
•
interference-free broadcast.
✎
NOTE
`
This applies only when listening to an FM
station.
26
English
: Press the TUNING
: Press the TUNING
) button to
) button to increase or
: Press the STOP ( @ )
: Press the STOP ( @ )
MONO for a clear,
Presetting Stations
Example : Presetting FM 89.10 in the memory
1.
Press the
FUNCTION button to select FM.
2.
Press the
STOP ( @ ) button on the front panel to
select <MANUAL> mode.
3.
Press the
TUNING (
<89.10>.
4.
Press the
ENTER button.
Number flashes on the display.
•
5.
Press the
[ ] buttons on the front panle to
select preset number.
You can select between 1 and 15 presets.
•
6.
Press the
ENTER button again.
Press the
ENTER button before number
•
disappears from the display.
•
Number disappears from the display and the
station is stored in memory.
7.
To preset another station, repeat steps 2 to 5.
To tune in to a preset station, press the
•
TUNING (
) buttons on the remote control to
select a channel.
About RDS broadcasting
Using the RDS (Radio Data System) to
receive FM stations
RDS allows FM stations to send an additional
signal along with their regular program signals.
For example, the stations send their station names,
as well as information about what type of program
they broadcast, such as sports or music, etc.
When tuned to an FM station which provides the RDS
service, the RDS indicator lights up on the display.
Description on RDS function
PTY (Program Type) : Displays the type of programme
•
currently being broadcast.
PS NAME (Program Service Name) : Indicates the name of
•
broadcasting station and is composed of 8 characters.
RT (Radio Text) : Decodes the text broadcast by a station
•
(if any) and is composed of maximum 64 characters.
) button to select
Advertisement
Table of Contents
