Plug & Play (Initial Setup) - Samsung LED TV User Manual

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the Red button.
1
Turn on the TV and
Touch Control.
2
Connect the
Samsung Wireless
LAN Adapter
3
Selecting Store
Demo or
Home Use
4
Selecting a country Press the ▲ or ▼ button, then press the ENTERE button.
5
Selecting a channel Press the ▲ or ▼ button, then press the ENTERE button.
6
Setting the Clock
Mode
7
Viewing the HD
Connection Guide.
8
Enjoy your TV.
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0." If you want to
change the PIN number, use the Change PIN function.
Plug & Play (Initial Setup)
y Turn on the Touch Control and then tap OK on your
remote.
✎
It may take about one minute to establish a wireless
connection between the TV and Touch Control
using the Samsung Wireless LAN Adapter.
y Connect the Samsung Wireless LAN Adapter to the TV. You can connect the Samsung
Wireless LAN Adapter using one of the methods shown on page 33.
y If the connection fails, reconnect the Samsung Wireless LAN Adapter and then try again.
Press the ◄ or ► button, then press the ENTERE button.
y Select the Home Use mode. Store Demo mode is for retail environments.
y To return the unit's settings from Store Demo to Home Use (standard): Press the volume
button on the TV. When the OSD volume is displayed, press and hold
Select the appropriate country.
Select the channel source to memorise. When setting the antenna source to Cable, a step
appears allowing you to assign numerical values (channel frequencies) to the channels. For
more information, refer to Channel → Auto Store (p. 17).
✎
Press the ENTERE button at any time to interrupt the memorisation process.
Set the Clock Mode automatically or manually.
Press the ▲ or ▼ button to select Auto, then press the ENTERE button.
y Auto: Allows you to select a time zone.
✎
Press the ▲ or ▼ button to highlight the time zone for your local area. Press the
ENTERE button. (Australia only)
y Manual: Allows you to manually set the current date and time (p. 25).
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
MENU for 5 sec.
11
English