Meridian G68 Installation Manual page 20

 
I n s t a l l i n g t h e
d i g i t a l s u r r o u n d
c o n t r o l l e r
To connect the G68 to power amplifiers or to analogue active and passive speakers powered by a Meridian G41
All versions of the G68 provide six balanced or unbalanced
analogue outputs to allow you to connect to six power amplifiers
and passive loudspeakers, or 300 Series Active and Passive
Installation Loudspeakers powered by the G41 Active Crossover
Amplifier.
• Connect the LEFT and RIGHT analogue outputs to the power
amplifier inputs for the main front loudspeakers.
• Connect the CENTRE analogue output to the power amplifier
input for the centre loudspeaker.
A330 P330
Main right Rear right
G68 Digital Surround Controller
ANALOGUE OUT
CHANNEL 1 INPUTS CHANNEL 2
1 3 4 2
CHANNEL 3 CH. A CH. B
A B
A330
Centre
• Connect the REAR L and REAR R analogue outputs to the power
amplifier inputs for the rear loudspeakers.
When the G41 is used with five speakers, as shown above, inputs
A and B for the rear speakers are unbalanced inputs. If you have a
G68XXD or G68XXV use the unbalanced LZ and RZ outputs.
• If the system includes a subwoofer connect the SUB analogue
output to an active analogue subwoofer, such as the Meridian
SW1600.
Analogue subwoofer
PHONO
COMMS
INPUT OUTPUT
G41 Powered
Crossover/Amplifier
P330 A330
Rear left
Main left