Husqvarna YTH24K48 Operator's Manual

Husqvarna YTH24K48 Operator's Manual

Ride-on mowers
Hide thumbs Also See for YTH24K48:

Advertisement

Available languages

Available languages

Operator's Manual
Gasoline containing up to 10% ethanol (E10) is accept-
able for use in this machine. The use of any gasoline ex-
ceeding 10% ethanol (E10) will void the product warranty.
Manual de Operario
Esta máquina puede utilizar gasolina con un contenido
de hasta el 10% de etanol (E10). El uso de una gasolina
YTH24K48
que supere el 10% de etanol (E10) anulará la garantía
del producto. the product warranty.
Please read the operator's manual carefully and make sure
you understand the instructions before using the machine.
115 53 52-27
Por favor lea cuidadosamente y comprenda
English/Spanish
estas intrucciones antes de usar esta maquina.

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for Husqvarna YTH24K48

  • Page 1 Manual de Operario Esta máquina puede utilizar gasolina con un contenido de hasta el 10% de etanol (E10). El uso de una gasolina YTH24K48 que supere el 10% de etanol (E10) anulará la garantía del producto. the product warranty. Please read the operator's manual carefully and make sure you understand the instructions before using the machine.
  • Page 2: Safety Rules

    SAFETY RULES Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. • Never leave a running machine unattended. Always turn WARNING: In order to prevent ac ci den tal off blades, set parking brake, stop engine, and remove starting when setting up, trans port ing,...
  • Page 3 SAFETY RULES Safe Operation Practices for Ride-On Mowers III. CHILDREN • If fuel is spilled on clothing, change clothing immediately. • Never overfill fuel tank. Replace gas cap and tighten securely. WARNING. CHILDREN CAN BE INJURED BY THIS EQUIPMENT. The American Academy GENERAL SERVICE of Pediatrics recommends that children be a •...
  • Page 4: Table Of Contents

    PRODUCT SPECIFICATIONS CONGRATULATIONS on your purchase of a new tractor. It has been designed, engineered and manu fac tured to Gasoline Capacity 3 Gallons/11,35 L give you the best possible dependability and performance. and type: Unleaded Regular Should you experience any problem you cannot easily Oil Type (API-SG-SL): SAE 10W30 (above 32°F/0°C) remedy, please contact your nearest authorized service...
  • Page 5: Assembly

    UNASSEMBLED PARTS Slope Sheet Keys (1) Oil Drain Tube (1) Quick Key(s) Connect ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. TOOLS REQUIRED FOR ASSEMBLY ADJUST SEAT (See Fig. 2) •...
  • Page 6: Assembly

    ASSEMBLY ✓CHECKLIST CHECK TIRE PRESSURE The tires on your tractor were overinflated at the factory BEFORE YOU OPERATE YOUR NEW TRAC TOR, WE for shipping purposes. Correct tire pressure is important WISH TO ASSURE THAT YOU RECEIVE THE BEST for best cutting performance. PERFORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.
  • Page 7: Operation

    OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. FAST SLOW REVERSE HIGH NEUTRAL CHOKE IGNITION SWITCH ENGINE START MOWER HEIGHT MOWER LIFT REVERSE ENGINE ON PARKING BRAKE ENGINE OFF OPERATION SYSTEM (ROS) CLUTCH/BRAKE...
  • Page 8 OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. Fig.
  • Page 9 OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor or per form ing any ad just ments or repairs. We rec om mend standard safety glasses or a wide vision safety mask worn over spectacles.
  • Page 10 OPERATION TO USE CRUISE CONTROL (J) (See Fig. 7) • For best cutting performance, grass over 6" in height should be mowed twice. Make the first cut relatively The cruise control feature can be used for forward travel only. high; the second to de sired height. TO ADJUST GAUGE WHEELS (See Fig.
  • Page 11 OPERATION TO TRANSPORT (See Figs. 3 and 11) When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in free wheel ing po si tion. Free wheel control is located at the rear drawbar of tractor. •...
  • Page 12: Before Starting The Engine

    OPERATION TO START ENGINE (See Fig. 3) BEFORE STARTING THE ENGINE When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move CHECK ENGINE OIL LEVEL fuel from the tank to the engine.
  • Page 13: Purge Transmission

    OPERATION MOWING TIPS PURGE TRANSMISSION • Tire chains cannot be used when the mower hous ing CAUTION: Never engage or disengage is attached to tractor. freewheel lever while the engine is run ning. • Mower should be properly leveled for best mowing performance.
  • Page 14: Maintenance Schedule

    MAINTENANCE BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE MAINTENANCE EACH SEASON STORAGE SCHEDULE HOURS HOURS HOURS HOURS Check Brake Operation Check Tire Pressure Check Operator Presence & ROS Systems Check for Loose Fasteners Check/Replace Mower Blades Lubrication Chart Check Battery Level Clean Battery and Terminals Clean Debris Off Steering Plate ck Transaxle Cooling...
  • Page 15: Maintenance

    MAINTENANCE TRACTOR CAUTION: Use only a replacement Always observe safety rules when per form ing any main- blade approved by the manufacturer of te nance. your tractor. Using a blade not approved by the manufacturer of your tractor is BRAKE OPERATION hazardous, could damage your tractor and void your warranty.
  • Page 16: To Change Engine Oil

    MAINTENANCE TRANSAXLE COOLING TO CHANGE ENGINE OIL (See Fig. 14 & 15) The transmission fan and cooling fins should be kept clean Determine temperature range expected before oil change. to assure proper cooling. All oil must meet API service classification SG-SL. Do not attempt to clean fan or transmission while engine •...
  • Page 17: Clean Air Screen

    MAINTENANCE DECK WASHOUT PORT (See Fig. 17) ENGINE OIL FILTER Your tractor’s deck is equipped with a washout port on Replace the engine oil filter every season or every other oil its surface as part of its deck wash system. It should be change if the tractor is used more than 100 hours in one year.
  • Page 18 MAINTENANCE CLEANING • Clean engine, battery, seat, finish, etc. of all foreign matter. • Clean debris from steering plate. Debris can restrict clutch/brake pedal shaft movement, causing belt slip and loss of drive. CAUTION: Avoid all pinch points and movable parts (See .
  • Page 19: To Remove/Install Mower

    SERVICE AND ADJUSTMENTS WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER VICE OR AD JUST MENTS: • Depress brake pedal fully and set parking brake. • Place attachment clutch in “DISENGAGED” position. • Turn ignition key to “STOP” and remove key. •...
  • Page 20 SERVICE AND ADJUSTMENTS 2. ASSEMBLE FRONT GAUGE WHEEL (W) TO FRONT 5. INSTALL ANTI-SWAY BAR (S) (IF EQUIPPED) OF MOWER (See Fig. 22) (See Fig. 25- 27) H. FRONT MOWER ANTI-SWAY BAR (S) BRACKET W. FRONT GAUGE TOWARDS TOWARDS WHEEL TRANSAXLE MOWER DECK X.
  • Page 21 SERVICE AND ADJUSTMENTS 6. ATTACH MOWER SIDE SUSPENSION ARMS (A) TO • Insert other end of link (E) into hole in front mower CHASSIS (See Fig. 28) bracket (H) and secure with washer and small retainer spring (J). • Position front hole in side suspension arm (A) over pin on outside of tractor chassis and secure with large NOTE: Requires deck lifting.
  • Page 22 SERVICE AND ADJUSTMENTS TO LEVEL MOWER • If adjustment is necessary, see steps in Visual Adjust- ment instructions above. Make sure tires are properly inflated to the PSI shown on • Recheck measurements, adjust if necessary until both tires. If tires are over or under inflated, it may affect the sides are equal.
  • Page 23: To Replace Mower/Motion Blade Drive Belt

    SERVICE AND ADJUSTMENTS TO REPLACE MOWER BLADE DRIVE BELT TO REPLACE MOTION DRIVE BELT (See Fig. 36) (See Fig. 37) MOWER DRIVE BELT REMOVAL Park the tractor on level surface. En gage parking brake. • Park tractor on a level surface. En gage parking brake. For as sis tance, there is a belt installation guide decal on bottom side of left footrest.
  • Page 24: To Check Brake

    SERVICE AND ADJUSTMENTS BELT INSTALLATION - • Install new belt from tractor rear to front, over the steer- ing plate (H) and above clutch brake pedal shaft (J). WASH ERS • Pull belt toward front of tractor and roll belt around RE TAIN ING electric clutch and onto engine pulley (G).
  • Page 25: Replacing Battery, Fuse

    SERVICE AND ADJUSTMENTS TO REPLACE FUSE REPLACING BATTERY (See Fig. 40) Replace with 20 amp automotive-type plug-in fuse. The fuse holder is located behind the dash. WARNING: Do not short battery ter mi- nals by allowing a wrench or any other object to contact both terminals at the TO REMOVE HOOD AND GRILL ASSEMBLY same time.
  • Page 26: Storage

    STORAGE Immediately prepare your tractor for storage at the end ENGINE of the season or if the tractor will not be used for 30 days or more. FUEL SYSTEM IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS WARNING: Never store the trac tor with FROM FORMING IN ES SEN TIAL FUEL SYSTEM PARTS SUCH gas o line in the tank inside a building AS CARBURETOR, FUEL FIL TER, FUEL HOSE, OR TANK...
  • Page 27: Trou Ble Shoot Ing

    TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION 1. Out of fuel. 1. Fill fuel tank. Will not start 2. Engine not “CHOKED” properly. 2. See “TO START ENGINE” in Operation section. 3. Engine flooded. 3. Wait several minutes before attempting to start. 4.
  • Page 28 TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION Engine continues 1. Faulty operator-safety presence control 1. Check wiring, switches and connections. If not system. corrected, contact an authorized service center/ to run when oper- department. ator leaves seat with attachment clutch engaged 1. Worn, bent or loose blade. 1.
  • Page 30 (a) Engines and Attachments.Except where otherwise indicated on Exhibit A, all Engines and Attachments are not covered by this Limited Warranty. In most cases, these items are NOT manufactured by Husqvarna in which case they may be covered separately by their respective manufacturer's warranties if one is provided and included with the product at the time of purchase.
  • Page 31 10. Authorized Husqvarna Servicing Dealer/Center. In order to obtain warranty coverage it is your responsibility (at your expense) to deliver or ship your Husqvarna unit to an authorized Husqvarna Servicing Dealer/Center and arrange for pick-up or return of your unit after the repairs have been made.
  • Page 32: Warranty

    Riding Lawn Tractors: Frame, Chassis, Front Axle 5 Years No Warranty No Warranty Engine* Transmission (if made by Husqvarna/Peerless) 3 Years No Warranty No Warranty Transmission (if third party)** XLS Models only - stamped deck shell. Armor Protected Limited Warranty...
  • Page 33 ** See reference 1 (b) of the warranty statement. RZ - Two (2) Year Consumer warranty, parts & labor, with Hydro-Gear Distributor network. EZ - One (1) Year Commercial warranty, parts & labor, with Husqvarna. Two (2) Year Consumer warranty, parts & labor, with Hydro-Gear Distributor network.
  • Page 34: Español

    REGLAS DE SEGURIDAD Prácticas de Operación Seguras para las Segadoras Conducibles PELIGRO: ESTA MAQUINA CORTADORA ES CAPAZ DE AMPUTAR LAS MANOS Y LOS PIES Y DE LANZAR OBJETOS. SI NO SE OBSERVAN LAS INSTRUCCIONES DE SEGURIDAD SIGUIENTES SE PUEDEN PRODUCIR LESIONES GRAVES O LA MUERTE. •...
  • Page 35 REGLAS DE SEGURIDAD Prácticas de Operación Seguras para las Segadoras Conducibles III. NIÑOS • Si se vierte carburante sobre la ropa, cambiarse la ropa inmediatamente. • Nunca llenar el depósito más de lo debido. Volver a colocar ADVERTENCIA: LOS NIÑOS PUEDEN SUFRIR DA- el tapón del gas y cerrar de modo firme.
  • Page 36: Especificaciones Del Producto

    ESPECIFICACIONES DEL PRODUCTO FELICITACIONES por la compra de su tractor. Ha sido diseñado, planificado y fabricado para darle la mejor confiabilidad y el mejor rendimiento posible. Capacidad y 3 Galones/11,35 L Tipo de Gasolina: Regular Sin Plomo En el caso de que se encuentre con cualquier problema que no pueda solucionar fácilmente, haga el favor de ponerse en con- Tipo de Aceite SAE 10W30 (sobre 32°F/0°C)
  • Page 37: Montaje/Pre Operación

    PEDAZOS PARA LA MONTAJE Hoja de pendiente Llaves (1) Tubo de desagüe Llaves (1) Accesorio del conexión MONTAJE Su tractor nuevo ha sido montado en la fábrica con la excepción de aquellas partes que no se han montado por razones de envío. AJUSTE EL ASIENTO (Vea Fig.
  • Page 38 MONTAJE ✓ REVISIÓN DE LA PRESIÓN DE LAS LLANTAS LISTA DE REVISIÓN Las llantas en su unidad fueron infladas demasiado en la fábrica ANTES DE OPERAR Y DE DISFRUTAR DE SU TRACTOR por razones de envío. La presión de las llantas correctas es im- NUEVO, LE DESEAMOS QUE RECIBA EL MEJOR portante para obtener el mejor rendimiento en el corte.
  • Page 39: Operación

    OPERACIÓN Estos símbolos pueden aparecer sobre su tractor o en la literatura proporcionada con el producto. Aprenda y comprenda sus significados. RÁPIDO MARCHA ATRÁS ALTO BAJO LENTO NEUTRO ESTRANGU- IGNICIÓN LACIÓN FRENO DE ABIERTA MOTOR MOTOR FRENO DE MOTOR ESTACIONAMIENTO SISTEMA ENCENDIDO ESTACIONAMIENTO...
  • Page 40 OPERACIÓN FAMILIARICESE CON SU TRACTOR LEA ESTE MANUAL DEL DUEÑO Y LAS REGLAS DE SEGURIDAD ANTES DE OPERAR SU TRACTOR Compare las ilustraciones con su tractor para familiarizarse con las ubicaciones de los diversos controles y ajustes. Guarde este manual para referencia en el futuro. Fig.
  • Page 41 OPERACIÓN La operación de cualquier tractor puede hacer que salten objetos extraños dentro de sus ojos, lo que puede producir daños graves en éstos. Siempre use anteojos de seguridad o pro tec cio nes para los ojos mientras opere su tractor o cuando haga ajustes o reparaciones. Recomendamos gafas de seguridad o una máscara de visión amplia de seguridad usada sobre las gafas.
  • Page 42 OPERACIÓN UTILIZAR EL MANDO CRUCERO (J) (Vea Fig. 7) • Para obtener el mejor rendimiento de corte, el césped que tiene más de 6 pulgadas de altura debe segarse dos veces. El mando crucero se puede utilizar sólo durante la marcha hacia Haga el prim er corte relativamente alto;...
  • Page 43 OPERACIÓN • Si es absolutamente necesario el parar, empuje el pedal de freno rápidamente a la posición de freno y en gan che el freno de estacionamiento. • Para volver a empezar con el movimiento, suelte len ta men te, el freno de estacionamiento y el pedal de freno.
  • Page 44 OPERACIÓN PARA HACER ARRANCAR EL MOTOR (Vea Fig. 3) REMOLQUE DE CARRETILLAS O OTROS ACCESORIOS Al hacer arrancar el mo tor por la primera vez o si se ha acabado el com bus ti ble del mo tor, se necesitará tiempo para el arranque Remolque solamente los accesorios recomendados y especifica- ex tra para mov er el com bus ti ble desde el estanque hasta el mo tor.
  • Page 45 OPERACIÓN CONSEJOS PARA SEGAR PURGAR LA TRANSMISIÓN • No se pueden usar las cadenas para las llantas cuando la PRECAUCIÓN: Nunca enganche o desen- caja de la segadora está adjunta al tractor. ganche la palanca del control de rue da libre •...
  • Page 46: Tabla Del Mantenimiento

    MANTENIMENTO Revisar la operación del freno Revisar la presión de las llantas Vérifiéz la commande de présence d'opérateur et le sistema d ROS Revisar si hay sujetadores sueltos Afilar/cambiar las cuchillas de la segadora Tabla de lubricación Revisar el nivel Limpiar la batería y los terminales Revisar el enfriamiento del transeje Limpie los residuos de la placa de dirección.
  • Page 47 MANTENIMENTO TRACTOR CUIDADO DE LA CUCHILLA Para obtener resultados óptimos, las cuchillas de la cortadora Siempre observe las reglas de seguridad cuando dé mante ni- deben estar afiladas. Reemplace las cuchillas que estén gastadas, mien to. dobladas o dañadas. OPERACIÓN DEL FRENO PRECAUCIÓN: Usar solamente la hojas de Si el tractor necesita más de cinco (5) pies para detenerse repuesto aprobada por el fabricante de su...
  • Page 48 MANTENIMENTO ENFRIAMIENTO DEL TRANSEJE CUBIERTA DEL TABLERO Las aletas de enfriamiento y el ventilador de la transmisión tienen INFERIOR que mantenerse limpios para asegurar el enfriamiento adecuado. No trate de limpiar el ventilador o la transmisión cuando el motor esté funcionando o mientras la transmisión esté caliente.Para SUJETADOR impedir daños a las juntas, no use un rociador de aire compresado RANURAS...
  • Page 49: Filtro Del Aire

    MANTENIMENTO PUERTO DE LAVADO DE LA CUBIERTA FILTRO DEL AIRE (Vea Fig. 17) Su motor puede sufrir averías y funcionar de manera incorrecta La cubierta de su tractor está equipada con un puerto de lavado con un filtro del aire sucio. Déle servicio al filtro de aire más a sobre la superficie que forma parte del sistema de lavado de la menudo si se usa en condiciones polvorosas.
  • Page 50 MANTENIMENTO LIMPIEZA • Limpie todo material extraño del motor, la batería, el asiento, el pulido, etc. • Limpie los desechos de la placa guía. Los desechos pueden limitar el movimiento del eje del pedal del freno/embrague, lo que hará que patine la correa y que se pierda la tracción. PRECAUCIÓN: Evite todos los puntos de enganche y las piezas móviles.
  • Page 51: Servicio Y Ajustes

    SERVICIO Y AJUSTES ADVERTENCIA:PARA EVITAR LESIÓNES SERIAS, ANTES DE DAR CUALQUIER SERVICIO O DE HACER AJUSTES 1. Presione el pedal de freno completamente y aplique el freno de estacionamiento. 2. Ponga el embrague del accesorio en la posición desenganchado (DISENGAGED). 3.
  • Page 52 SERVICIO Y AJUSTES 2. ARME LA RUEDA CALIBRADORA DELANTERA (W) EN 5. SI LA TIENE, INSTALE LA BARRA ANTIBALANCEO (S) LA PARTE DELANTERA DE LA CORTADORA DE CÉSPED (Vea Fig. 25 - 27) (Vea Fig. 22) BARRA ANTIBALANCEO (S) H. ESCUADRA DE LA CORTADORA DE HACIA EL HACIA LA PLATAFORMA DE...
  • Page 53 SERVICIO Y AJUSTES 6. INSTALE LOS BRAZOS DE SUSPENSIÓN LATERAL DE • Inserte el otro extremo del eslabón (E) en el agujero de la LA CORTADORA DE CÉSPED (A) EN EL CHASIS escuadra derecha de la cortadora de césped (H) y asegure (Vea Fig.
  • Page 54 SERVICIO Y AJUSTES PARA NIVELAR LA SEGADORA • Vuelva a verificar las medidas y ajuste nuevamente, en caso necesario, hasta que ambos lados queden iguales. Asegúrese de que los neumáticos estén inflados a la PSI que se indica en estos. Si están demasiado inflados o poco AJUSTE DE DELANTE A ATRÁS (Vea Fig.
  • Page 55 SERVICIO Y AJUSTES PARA REEMPLAZAR LA CORREA DE LA PARA CAMBIAR LA CORREA DE IMPULSIÓN CUCHILLA DE LA SEGADORA (Vea Fig. 36) DE MOVIMIENTO (Vea Fig. 37) Estacione el tractor en una superficie nivelada. Ponga el freno DESMONTAJE DE LA CORREA DE TRANSMISIÓN DE LA de mano.
  • Page 56 SERVICIO Y AJUSTES MONTAJE DE LA CORREA 1. Instale la correa nueva pasándola de la parte de atrás a la ARANDELAS parte de adelante del tractor, por encima de la placa de direc- ción (H) y del vástago del pedal del embrague / freno (J). ANILLO DE RETENCIÓN 2.
  • Page 57 SERVICIO Y AJUSTES REEMPLAZAR LA BATERIA (Vea Fig. 40) PARA CAMBIAR EL FUSIBLE Cámbielo por un fusible tipo enchufable de 30 amps, tipo au to- mo triz. El sujetador del fusible está ubicado detrás del tablero. ADVERTENCIA: No haga cortocircuito con los terminales de la batería al permitir que una PARA REMOVER EL CONJUNTO DEL CAPÓ...
  • Page 58: Almacenamiento

    ALMACENAMIENTO MOTOR Inmediatamente prepare su tractor para el almacenamiento al final de la temporada o si el tractor no se va a usar por 30 días o más. SISTEMA DE COMBUSTIBLE IMPORTANTE: Es important evitar que se forman depositos Advertencia: Nunca almacene el tractor con de goma en partes fundamentales del sistema de combus-tible gasolina en el estanque dentro de un edificio tales como el carburador, el filtro del com bus ti ble, la manguera...
  • Page 59: Identificación De Problemas

    IDENTIFICACIÓN DE PROBLEMAS PROBLEMA CAUSA CORRECCIÓN No arranca Sin combustible. Llene el estanque de combustible. Motor sin la “ESTRANGULACIÓN” (CHOKE) Vea “PARA HACER ARRANCAR EL MOTOR” en la sec- adecuada. ción de operación. Motor ahogado. Espere varios minutos antes detratar de arrancar. Bujía mala.
  • Page 60 IDENTIFICACIÓN DE PROBLEMAS PROBLEMA CAUSA CORRECCIÓN Vibración Cuchilla desgastada, doblada o suelta. Cambie la cuchilla. Apriete el perno de la cuchilla. Mandril de la cuchilla doblado. Cambie la mandril de la cuchilla. excesiva Parte(s) suelta(s)/dañada(s). Apriete la(s) parte(s). Cambie las partes dañadas. El motor continúa Sistema de control que exige la presencia del Revise el alambrado, los interruptores y la conexiones.Si...
  • Page 62 (b) Transmisiones. Excepto en los casos en que se indica otra cosa en el Anexo A, las transmisiones/transejes (incluidos los sistemas de transmisión) no están cubiertos por esta garantía limitada. En la mayoría de los casos, estos elementos NO han sido fabricados por Husqvarna, en cuyo caso pueden estar cubiertos por separado por la garantía de sus respectivos fabricantes, si tal garantía se proporciona e incluye con el producto en el momento de la compra.
  • Page 63: Garantía

    Si desconoce la ubicación del concesionario de servicio Husqvarna autorizado más cercano, llame a Husqvarna al 1-800-487-5951 de 8:00 a.m. a 8:00 p.m., Hora Estándar del Este, o visite www.husqvarna.com. En caso de requerir asistencia o si tiene preguntas con respecto a esta Garantía limitada, puede comunicarse con nosotros a través del 800-487-5951 (EE.
  • Page 64 Tabla de garantía limitada de 2012 para productos de consumo con ruedas Anexo A Consumidor Comercial (cualquier uso comercial, Alquiler (personal, solo para profesional, institucional, agrícola o (cualquier uso uso doméstico) para alquiler) que genere ingresos, que no sea Producto/Componente para alquiler) Tractores cortacésped: , s i...
  • Page 65 Comercial Alquiler * Consulte la garantía separada del fabricante o del fabricante del motor. Motores LCT en quitanieves y arados específicos, garantía a través de Husqvarna. ** Consulte la referencia 1 (b) de la declaración de garantía. RZ – Dos (2) años de garantía al consumidor, piezas y mano de obra, con red de distribuidores Hydro-Gear.
  • Page 66 SERVICE NOTES / AVISO...
  • Page 67 SERVICE NOTES / AVISO...
  • Page 68 10/11/2012 JM...

This manual is also suitable for:

Fast tractoryth24k48

Table of Contents