Goldmund EIDOS 36D User Manual page 18

11 FIRST CONNECTION contd
Note: If you selected Not Connected in both steps 7 and 8, this completes the set-up.
Press ENTER to leave the Set-up Navigator.
If you selected Connected in step
7, then answer the following questions about the
speakers in your system, otherwise jump to step 12.
9 - Do you have a center speaker connected to your AV Receiver / Processor?
Select Connected or Not Connected.
10 - Do you have surround speakers connected to your AV receiver / Processor?
Select Connected or Not Connected.
11 - Do you have a sub-woofer connected to your AV receiver / Processor?
Select Connected or Not Connected.
Note: If you selected Not Connected in step 8, that completes the setup. Press ENTER to
leave the Set-up Navigator.
Questions 12 through 15 are concerned with the digital decoding capabilities of your AV
receiver or Multi-channel processor.
12 - Is your AV receiver / Processor Dolby Digital compatible?
Select Compatible, Not Compatible or Don't Know.
13 - Is your AV receiver / Processor DTS compatible?
Select Compatible, Not Compatible or Don't Know.
14 - Is your AV receiver / Processor compatible with 96kHz Linear PCM audio?
Select Compatible, Not Compatible or Don't Know.
15 - Is your AV receiver / Processor MPEG compatible?
Select Compatible, Not Compatible or Don't Know.
16 - Press ENTER to complete the setup, or press HOME MENU to quit the Setup
Navigator without making any changes.
Congratulations, set up is complete!
18
EIDOS 36D Universal Player