Goldmund EIDOS 36D User Manual page 37

14 THE AUDIO SETTINGS MENU contd
4 - Variable setting only: Set the channel levels for each speaker.
• Use the cursor up/down to select a speaker.
• Use the cursor left/right to adjust the channel level for that speaker.
Channel levels can be set from –6 dB to +6 dB. in 0.5 dB increments.
5 - Press ENTER to make the settings and exit the audio settings screen.
Notes: You can't adjust the channel level for any speakers that are set to Off in the
Speaker Installation menu screen.
The Fix setting is equivalent to setting all the channel levels to +6dB. Therefore, the
Variable setting will usually sound quieter than the Fix setting.
Speaker Distance
•
Default setting: all speakers 3m
To get the best surround sound from your system, you should set up the speaker distances
from your listening position.
1 – Press HOME MENU and select "Audio Settings" from the on-screen display.
2 – Move the cursor down until you reach the Speaker Distance setting screen.
• Use the cursor (up/down) to select a speaker.
• Use the cursor (left/right) to adjust the distance from your listening position to that
speaker.
Front left/right (L/R) speaker distances can be set from 30cm to 9m in 10cm increments.
The center speaker (C) and subwoofer (SW) can be set from –2m to +2m relative to the
front left/right speakers.
Surround left/right (LS/RS) speakers can be set from –6m to +2m relative to the front
left/right speakers.When you adjust the front left (L) or front right (R) speaker, all the other
speaker distances are adjusted relative to the speaker.
3 – Press ENTER to make the settings and exit the Audio Settings screen.
Note: The speaker distance settings have no effect on SACD playback. The channel level
settings, however, do apply.
37
EIDOS 36D Universal Player