Case 3 : Component Video Output Jacks; Other Type Of Connecting The Audio Output Cable; Case 1 : Connecting To Your Tv; Case 2 : Connecting To A Stereo Amplifier With Av - Samsung DVD-R121E Instruction Manual

Case 3 : Component Video
output jacks
1. Connect Component video cables(not supplied)
between the COMPONENT OUT(Y,P
DVD Recorder and COMPONENT IN(Y,P
on your TV.
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on the DVD Recorder and AUDIO
IN jacks on TV (or AV amplifier).
(See pages 21 to 22).
3. After connecting, refer to the page 35 to 36.
You will enjoy high quality and accurate color
reproduction images.
2
COMPONENT
green
Y
blue
Pb
red
Pr
Make sure that the color coded
connections match. The Y, P
NOTE
component output jacks of your DVD
Recorder must be connected to the exact
corresponding component input jacks on
your TV.
Progressive setting is only available when
the Video Out is set to Component.
(See page 36)
,P ) jacks on
B R
,P ) jacks
B R
1
, P
B R
Other type of connecting
the Audio output cable
There are several ways to output audio signal not using
scart cables. Select the audio connection that best suits
you below.

Case 1 : Connecting to your TV

Case 2 : Connecting to a stereo amplifier with AV

output jacks
Case 3 : Connecting to an AV amplifier with a
digital output jack
Manufactured under license from Dolby
Laboratories. "Dolby" and the double-D symbol
are trademarks of Dolby Laboratories.
"DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, Inc.
Case 1 : Connecting to your TV
If your TV has audio input jacks, use this connection.
yellow
white
red
21
English -