Advertisement
Select Fan mode if you want to ventilate your room. It helps to refresh
the air in your room. You can adjust the fan speed in this mode.
1
Press the
(On/Off) button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
button on the remote control until Fan is displayed.
2
Press the
Result:
The indoor unit beeps each time you press the
The air conditioner runs in Fan mode.
The temperature is set automatically.
Note
You can change modes at any time.
3
Press the
button to select the fan speed until the required setting is
displayed.
Low
Medium
Result:
Each time you press the
4
To control the airflow direction, refer to page 20.
High
button, the indoor unit beeps.
button.
Advertisement
