Samsung DVD-HR773 User Manual page 37

Power Save Setting
~ On: If it is set to On and you turn off the HDD & DVD recorder, the
recorder enters the Power Save and the front panel
display goes off.
Off : Does not set to Power Save. Normally select OFF mode.
~
M
`
In standby mode with "Power save mode" on, Some function is not
available.
Signal from ANT OUT of Recorder to ANT IN of TV will be noisy Refer to
page 22.
anynet+ (HDMi CEC)
Anynet+ is a function that can be used to operate the recorder using a
Samsung TV remote control, by connecting the HDD & DVD
RECORDER to a SAMSUNG TV using an HDMI Cable. (See pages
27~28)
(This is only available with SAMSUNG TVs that support Anynet+.)
1. Press the ▲▼ buttons to select anynet+ (HDMi CEC), then press
the OK or ▶ button. Anynet+ (HDMI CEC) items will be displayed.
2. Press the ▲▼ buttons to select On, then press the OK or ▶
button.
For using anynet+ (HDMi CEC)
1. Connect the HDD & DVD RECORDER to a Samsung TV with an HDMI cable. (See pages 27~28)
. Set the Anynet+ (HDMI CEC) to "On" on your HDD & DVD RECORDER.
(see above)
. Set the Anynet+ function on your TV.
(See the TV instruction manual for more information.)
You can operate the HDD & DVD RECORDER by using TV
~
remote control.
(TV buttons that can be used to control the HDD & DVD RECORDER :
, , , , ,
When you press anynet+ button on the TV remote control, the
~
OSD to the left will appear.
- Select Device : Use this option to select device.
- record : Use this option to start recording or stop recording.
- Menu on Device : Same as MEnU button (
- Device Operation : Same as inFO button (
M
`
By pressing the STANDBY/ON button of the recorder while watching TV, the TV screen will change to the play
screen.
`
If you power on a DVD recorder when the TV power is off, the TV will power On.
`
If you turn the TV off, the HDD & DVD Recorder will power off automatically. (When the HDD & DVD Recorder is
recording, it can't be powered off.)
`
If you change the HDMI to other sources (Composite, Component, RF... etc) in TV while playing the DVD disc, the
HDD & DVD Recorder will stop playing. But the HDD & DVD Recorder may keep the DVD disc Recording.
and , buttons, ~
) on the HDD & DVD RECORDER remote control.
) on the HDD & DVD RECORDER remote control.
HDD & DVD RECORDER
HDD
Clock Set
Library
Auto Power Off
Timer Record
Power save
Disc Manager
Anynet+ (HDMI CEC)
Setup
DivX(R) Registration
m MOVE s SELECT
HDD & DVD RECORDER
HDD
Clock Set
Library
Auto Power Off
Timer Record
Power save
Disc Manager
Anynet+ (HDMI CEC)
Setup
DivX(R) Registration
MOVE SELECT
m s
n
DVDR
View TV
Select Device
Record
Menu on Device
Device Operation
button)
Receiver : Off
Setup
>Move sEnter
eExit
System
\
: Off \
: Off \
Off
On
: On \
\
r RETURN e EXIT
System
\
: Off \
: Off \
: On \
Off
\
On
RETURN EXIT
r e
<TV Menu>
English _