Plug & Play Setup - Samsung DVD-HR773 User Manual

system setup
On-SCrEEn MEnU naVigaTiOn
The on-screen menus allow you to enable or disable various functions on your HDD & DVD RECORDER.
Press the MEnU button to open the on-screen menu and then use the following buttons to navigate through the on
screen menus.
1. ▲▼, ◀▶ buttons
Press these buttons on the remote control to move the selection
bar ▲▼, ◀▶ to cycle through the menu options.
. OK button
Press this button on the remote control to confirm any new settings.
. rETUrn button
Press this button on the remote control to return to the Previous
menu screen displayed or to exit the on-screen menu.
. EXiT button
Press this button to exit the on-screen MEnU.
PLUg & PLaY SETUP
Your HDD & DVD RECORDER will automatically set itself up when it is plugged in for the first time. TV stations and
clock will be stored in memory. The process takes a few minutes. Your HDD & DVD RECORDER will then be ready
for use.
1. Connect the RF cable as indicated on page 22.
(Connecting Your HDD & DVD RECORDER to the TV Using the RF
Cable and scart cable.)
To use HDMI cable, make the Audio/Video connection before
plugging in the power cord or after finishing the "Plug & Play Setup"
Do not connect the HDMI cable while the "Plug & Play Setup" is
progressing.
. Plug the HDD & DVD RECORDER into the mains. "AUTO" in the
front panel display flickers.
. Press a number button to select the language.
. Press the OK button to start the auto setup.
_ system setup
HDD & DVD RECORDER
HDD
Title
Library
DivX
Timer Record
Music
Disc Manager
Photo
Setup
MOVE SELECT RETURN
m s r
Press 1 English
Touche 2 Français
Drücken Sie 3 Deutsch
Pulse 4 Español
Premere 5 italiano
Druk op 6 nederlands
Tryck 7 Svensk
Tryk 8 Dansk
Paina 9 Suomi
Trykk 0 norsk
MaCrOViSiOn MP52H
auto setup will be started.
Yes No
Library
\
\
\
\
EXIT
e