Table of Contents
Advertisement
4.
In the disk status area, select the disks that you want to have in the
new array. The disks can be the ones included in the RAID to be
migrated to.
5.
Set the capacity of the migrated array the same as the original array.
To expand capacity, just key in the capacity of the new array.
6.
Click Commit to begin the split.
Note:
If you have set the wrong migration configura-
tion, you will not be allowed to press the Commit
key. You may have too few disks for the selected
RAID level, or not enough space for the selected
capacity.
7.
Unless the migration is completed immediately, the array list area
will show the RAID in migration.
75
Chapter 6
Advertisement
Table of Contents
