Table of Contents
Advertisement
a. In the User Input area, highlight a spare type using the arrow
keys.
b. If applicable, in the Disks area, highlight the disk(s) to use as a
spare and press Insert to select them.
c. Press Enter to add the spare disk(s).
5.
To select an array size, do one of the following:
6.
Use the Page Up/Page Down keys or the arrow keys to select a
size, and then press Enter.
Note:
Or do the following:
To create an array that is greater than 2.199 TB (the maximum
allowed by some operating systems):
Note:
1.
Press PAGE UP or the up arrow to increase the array size. You are
asked if you want to limit the size of the array to the 2 TB maxi-
mum.
2.
Press ESC to create a larger array.
3.
Press PAGE UP or the up arrow until you have reached either the
desired size or the maximum available.
4.
Press Enter.
5.
Select a caching mode using the arrow keys, and then press Enter.
6.
Press C to continue the array creation process.
DNS-3200 User's Manual
By default all available space up to 2.199 TB is
selected.
The Windows operating system does not support
arrays larger than 2 TB.
56
Advertisement
Table of Contents
