American DJ Accu Spot 250 User Instructions page 12

Accu Spot 250™
LADJ
- With this function you can adjust the lamp via
the control board. The shutter opens and the lamp can be
adjusted. In this mode, the device will not react to any con-
trol signal.
1. Access the main menu.
2. Tap the UP button until "ADJU" is displayed, press ENTER.
3. Tap the UP button until "LADJ" is displayed, press ENTER.
4. The display will show "ON/OFF".
5. Press the UP button to select "ON" to activate this function,
or "OFF" to deactivate this function.
6. Press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
TINE MAIN MENU -
NAT I
- With this function you can display the running time
of the unit.
1. Access the main menu.
2. Tap the UP button until "TIME" is displayed, press ENTER.
3. Tap the UP button until "NAT I" is displayed, press ENTER.
4. The display shows "XXXX", "X" stands for the number of
hours.
5. Press ENTER or EXIT/DN to return to the main menu.
LAT I
- With this function you can display the running time
of the lamp.
1. Access the main menu.
2. Tap the UP button until "TIME" is displayed, press ENTER.
American DJ - www.americandj.com - Accu Spot 250™ Instruction Manual Page 23
®
System Menu Accu Spot 250™
3. Tap the UP button until "LAT I" is displayed, press ENTER.
4. The display shows "XXXX", "X" stands for the number of
hours.
5. Press ENTER or EXIT/DN to return to the main menu.
CLNT
the unit.
1. Access the main menu.
2. Tap the UP button until "TIME" is displayed, press ENTER.
3. Tap the UP button until "CLNT" is displayed, press ENTER.
4. Press ENTER, the display will show "ON/OFF".
5. Press the UP button to select "ON" to activate this function,
or "OFF" to deactivate this function.
6. Press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
CLLT
the lamp. Note Very Important: Please clear the lamp time
every time you replace the lamp.
1. Access the main menu.
2. Tap the UP button until "TIME" is displayed, press ENTER.
3. Tap the UP button until "CLLT" is displayed, press ENTER.
4. Press ENTER, the display will show "ON/OFF".
5. Press the UP button to select "ON" to activate this function,
or "OFF" to deactivate this function.
6. Press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
American DJ
- With this function you can clear the running time of
- With this function you can clear the running time of
- www.americandj.com - Accu Spot 250™ Instruction Manual Page 24
®
System Menu