Getting Connected; Mobile Networks; Wi-Fi - Huawei Vitria User Manual

•

Getting Connected

Mobile Networks

Your mobile phone will be automatically configured to use your network
operator's 2G/3G/4G service (if available) when you turn on the phone for the
first time. Note that the SIM card must be inserted.
Checking the Network Connection
1. Touch > Settings
2. Under WIRELESS & NETWORKS, touch Mobile networks.
3. Touch Access Point Names or Network operators to check the network
connection.
Your phone will automatically read the access point settings from the SIM
card (if any). Therefore, do not change the access point parameters;
otherwise, you might not be able to access network resources.
Turning On the Data Service
1. Touch > Settings
2. Under WIRELESS & NETWORKS, touch Mobile networks.
3. Select the Data enabled check box to turn on the data connection.
If you do not need to access a wireless data network, you can clear the Data
enabled check box to save data traffic costs.

Wi-Fi

Wi-Fi gives you wireless access to broadband Internet. To use Wi-Fi on your
mobile phone, you must have an access to wireless access points (hotspots).
Obstacles that block the Wi-Fi signal will reduce its strength.
Turning On Wi-Fi
1. Touch > Settings
> All.
> All.
> All.
37
Getting Connected