Table of Contents
Advertisement
Digital Video Playback
The digital video playback is initiated in three ways: (1) only videos are
present in the device/card, (2) the Video option was selected from the Multiple
Contents in Card screen, or (3) the Video shortcut button on the remote control
was pressed.
In the digital video playback mode, the Video Thumbnails Screen will
appear. All the videos found in the device/card will be displayed in continuous
pages of video thumbnails.
If the device/card has more than one folder and you desire to view the
videos by folder, go to chapter six (6) "File Library Management" for how to
access individual folders.
Use the navigation buttons to move through the thumbnails in the
thumbnail page, and use the I<< and >>I buttons to jump to the previous or
next page of thumbnails.
If the Auto Start option in the SETUP menu is set to ON, the playback of
all files at Power-Up would be in effect and the Video Thumbnails Screen will
not be visible.
Video Thumbnails Screen
• Press the ENTER button on the remote control to playback the highlighted
thumbnail in full-screen. Once in full-screen, pressing the ENTER button again
will return to the Video Thumbnails Screen.
• Press the PLAY/PAUSE button on the remote control to start the Video
Show. Once in Video Show, press PLAY/PAUSE button to pause or resume
the Video Show.
. Press the STOP button to return to the Video Thumbnails Screen.
• Press the VOL button on the remote control to change the volume of the
video.
• Press the MUTE button on the remote control to mute video.
• Press the HOME button on the remote control to jump to the main level
of the DMP application.
• Press the DISPLAY button on the remote control to view, by OSD, the
properties of the video displayed on screen.
• Press the PHOTO button on the remote control to jump to the Photo
Thumbnails Screen. If no photo file is present, no action takes place.
• Press the MUSIC button on the remote control to jump to the Music
Library Screen. If no music file is present, no action takes place.
• Press the FILE button on the remote control to jump to the File
Management Screen.
Advertisement
Table of Contents
