Place Drain Hose; How To Change The Drain Hose; Assembling Sound Absorption Panel - Samsung WA70Q3 User Manual

Table of Contents

Advertisement

PLACE DRAIN HOSE

Decide the drain hose direction
Put the end of the drain hose into flume.
Cautions when inserting the drain hose:
Don't exceed more than 3m when the
drain hose is used by connecting whth
other hoses.

HOW TO CHANGE THE DRAIN HOSE

The drain hose is normally connected on the left side of the machine. Consumers can change it
to right side, according to the actual situation,if necessary.
1.
Remove the screw, then take off the back cover.
1
Remove the screw, then take off the hole cap on
2
the left side.
Hold the positioning boss in the right side hole cap,
3
then braek out,rotate 90°, according to the
counterclockwise direction,then take off it.
3.Change the drain hose direction.
Make the drain hose drill through the drain hole,
1
carefully.
Put the fixing position of drain hose into the holder,
2
and fix it tightly.
Do not make the drain hose distorted, knoted.
Drain hole
Before changing, the power supply must be cut off (Prevent an electric shock)
Be careful not to damage the drain hose during changing its position. If the drain hose is
damage, it will occur leaking.

ASSEMBLING SOUND ABSORPTION PANEL

1. Put a blanket or other soft cloth under the washer, then put down the
washer.
2. Insert the sound absorption panel into the assembling slot ,in the bottom
of washer.
WA70Q3-DC68-02566D-EN-00.indd 7
Be careful to drain water out at the
end of the drain hose.
Less than 3 m
1
2
3
Cap
Cap
Fixing
Holder
position
1
Drain hose
2
The doorsill shouldn't be more than
5cm.
Less than 3 m
2.Take down the drain hose.
Open the holder, fixxing the drain hose.
1
Take off the drain hose from drain hole, carefully.
2
Holder
1
Drain hose
4.
Install the back cover.
1
Cover the hole cap on the drain hole, then fix it with
2
screw.
Make hole cap through the drain hose,and cover
3
into drain hole and rotate 90°,make the hole cap
and positioning boss on the hole cap, fix on the
case shell, tightly.
3
Cap
setting up your washer _7
Less than
5 cm
2
Drain hole
1
2
Cap
Front
Back
2009-4-30 14:05:40

Advertisement

Table of Contents
loading

Table of Contents