How To Connect The Drain Hose - Samsung WA95V9 User Manual

installation & maintenance

HOW TO CONNECT THE DRAIN HOSE

IN CASE OF PUMP-DRAINED WASHER
Take out the cap-hose and connect the
outlet-hose.
Be sure to join tightly the drain hose into the
drain-outlet on the side of the machine.
IN CASE OF GENERAL WASHER
1. After pressing the joint ring, insert to the drain hose.
2. After directing the drain hose to a drain, join to the
drainoutlet of the washing machine.
3. Be sure to join them tightly by pressing the joint ring and
pushing it into the drain-outlet.
• The length of drain hose is adjustable so that you can
extend the length appropriately.
HOW TO
• The handle of joint ring is pressed to pull out the drain hose.
Change the direction of the drain hose and follow the above
guideline again.
18_installation & maintenance
WA95V9IIC-02603C_EN.indd 18
cap-hose
CHANGE THE DRAIN HOSE DIRECTION
Be sure to join tightly the drain hose into the
drainoutlet on the back of the machine.
Install the drain hose in the position of about
90~100cm above the ground.
drain-outlet
2008-04-17 ¿ÀÈÄ 9:38:09