Samsung CS21Z40 Owner's Instructions Manual page 5

Channel - Fine Tune
If the reception is clear, you do
not have to fine-tune the
Fine Tune
channel, as this is done
Tune
Store
automatically during the search
Erase
and store operation. If however
the signal is weak or distorted,
Select
you may have to fine-tune the
channel manually.
◆ Tune: You can obtain a sharp and clear picture and
good sound quality.
◆ Store: You can memorise adjusted picture or sound.
◆ Erase: You can erase adjusted picture or sound.
Function - Child Lock
This feature allows you to
Channel
prevent unauthorized users,
such as children, from watching
: -/+
: ?
unsuitable programmes by
: ?
muting out video and audio.
Child Lock cannot be released
Adjust Exit
using front (or side) panel
buttons. Only remote control can release the Child Lock
setting, so keep the remote control away from children.
◆ Child Lock: On/Off
If you want to unlock a channel, set to Off.
◆ Prog.No.: Channel number to be locked.
◆ Lock: When press the œ or √ button, the Locked is
displayed.
➢
If any channel is locked, you can not enter the
Channel menu by using the control buttons on the
television, and the Child Lock : Locked is
displayed. You can access by using the remote control
only.
Function
Child Lock
Child Lock : On
Prog.No. : 1
Lock : ?
Select Adjust Exit
English - 5
Function - Time
◆ Clock
You can set the television
Time
clock so that the current time
Clock
Timer
is displayed when pressing
On time
Off time
the INFO button on the
remote control. You must
Select
also set the time if you wish
to use the automatic on or off timers.
➢
When pressing the "I" button (On/Off) on the front
(or side) of the television, the clock setting will be
reset.
◆ Timer
Select On to activate the On/Off timers.
◆ On time / Off time
You can set the On/Off timers so that the television will
switch on or off automatically at the time you select.
☛
You must set the clock first.
◆ Sleep Timer
You can select a time period of between 30 and 180
minutes after which the television automatically switches
to standby mode. Press the SLEEP button on the remote
control. If the sleep timer is not yet set, Off is displayed.
If it is already set, the remaining time before which the
television switches to standby mode is displayed.
☛
Auto Power Off
When you set the timer "On", the TV will eventually turn
off, if no controls are operated for 3 hours after the TV
was turned on by timer. This function is only available
in timer "On" mode and prevents overheating, which
may occur if a TV is on for too long.
Function
11:35 AM
On
07:00 AM
11:00 PM
Adjust Exit