Placing The Television In Standby Mode; Viewing The Menus - Samsung CS21Z40 Owner's Instructions Manual

Placing the Television in Standby Mode

The television can be placed in standby mode, in order to
reduce power consumption and wear of the cathode ray
tube. Standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
1 Press the POWER button on the remote control while
viewing. The television is in standby mode.
2 To switch the television back on, simply press it again.
☛
Do not leave the television in standby mode for long
periods of time (when you are away on holiday, for
example). Turn the television off by pressing the "I"
button (On/Off) on the front (or side) of the television. It
is best to unplug the set from the mains and aerial.

Viewing the Menus

1 Press the MENU button.
The main menu is displayed on the screen. Its left side
has four icons: Picture, Sound, Channel, and
Function.
Press the ... or † button to select one of the icons.
2
Press the œ or √ button to access the icon's sub-menu.
Press the ... or † button to move to items in the menu.
3
Press the œ or √ button to enter items in the menu.
Press the .../†/œ/√ button to change the selected
4
items. Press the MENU button to return to the previous
menu.
5 Press the EXIT button to exit from the menu.
Function - Plug & Play
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
1 If the television is in standby
mode, press the POWER
button on the remote control.
The Plug & Play is displayed. It flickers for a little
while, and then Language menu is displayed.
2 Select the appropriated
LANGUAGE
language by pressing the ...
ENGLISH
FRANÇAIS
or † button. Press the MENU
TÜRKÇE
button.
ADJUST
The Ant. Input Check
is displayed.
➢
Ant. Input Check
If any language is not
Auto Store
selected, the language
menu will disappear about 30 seconds later.
3 Make sure that the antenna is connected to the
television (refer to page 1).
English - 3
Press the œ or √ button to
4
search the channels. The
searching starts. To stop the
search, press the MENU
button.
Plug & Play
5 When the channel searching
has finished, the Time menu is
displayed with Clock
selected.
Press the œ or √ button to move to the hour or minute.
6
Set the hour or minute by pressing the ... or † button.
7 When you have finished, press
the MENU button.
SELECT
The ENJOY YOUR WATCHING is displayed, and then the
channel which has been stored will be activated.
Exit
Re-setting the Plug & Play
Method: MENU ➜ .../†
(Function) ➜ œ/√ ➜ .../† (Plug
& Play) ➜ œ/√
continued...
P 1
471 MHz 48%
Exit
Time
Clock -- : -- AM
Move Exit
ENJOY YOUR WATCHING
Function
Language : English
√ √
Time
√ √
Plug & Play
Blue Screen : Off
√ √
Child Lock
Select Enter Exit