Table of Contents
Advertisement
Viewing the Menus
1
Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: Input, Picture, Sound, Channel, and
Setup.
Press the ... or † button to select one of the icons.
2
Press the ENTER button to access the icon's sub-menu.
Press the ... or † button to move to items in the menu.
3
Press the ENTER button to enter items in the menu.
Press the .../†/œ/√ button to change the selected
4
items. Press the MENU button to return to the previous
menu.
5
Press the EXIT button to exit from the menu.
Setup - Plug & Play
(depending on the model)
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
1
If the television is in standby
mode, press the POWER
Start Plug & Play.
button on the remote
control.
Enter
The Start Plug & Play.
is displayed. To start Plug &
Language
Play, press the ENTER
Eng
lish
Indonesia
button. The Language
Melayu
menu is displayed.
➢
Français
The Language menu
will automatically
Move
appear after several
seconds, even if the ENTER button is not pressed.
Select the appropriated language by pressing the ... or
2
† button. Press the ENTER button.
The Check antenna
input. is displayed.
➢
If any language is not
selected, the language
menu will disappear
about 30 seconds later.
3
Make sure that the antenna
is connected to the
television (refer to page 1).
Press the ENTER button.
The Area menu is
displayed.
Press the ... or † button to
4
select your area. Press the
ENTER button.
5
To search the channels,
press the ENTER button. To
stop the search, press the
ENTER button.
When the channel
searching has finished, the
Clock Set menu is
displayed.
Press the œ or √ button to
6
move to the hour or minute.
Set the hour or minute by
pressing the ... or † button.
Plug & Play
7
When you have finished,
OK
press the MENU button.
Return
The Enjoy your
Plug & Play
watching. is displayed, and then the channel which
has been stored will be activated.
Re-setting the Plug & Play
Method: MENU ➜ ... ... /† † (Setup)
➜ ENTER ➜ ... ... /† † (Plug &
Play) ➜ ENTER
Enter
Skip
continued...
Plug & Play
Check antenna input.
OK
Enter
Skip
Plug & Play
Area
Asia/W.Europe
South Africa
CIS/E.Europe
America
China
Hong Kong/UK
Australia
NZL/Indonesia
Move
Enter
Skip
Plug & Play
Auto Store
Start
Enter
Skip
Plug & Play
Auto Store
P 1 C--
102MHz
7 %
Stop
Enter
Skip
Plug & Play
Clock Set
- - : - -
a m
Move
Enter
Skip
Enjoy your watching.
OK
TV
Setup
Plug & Play
√ √
√ √
Language
: English
√ √
Time
Child Lock
√ √
√ √
Blue Screen
: Off
√ √
Melody
: On
√ √
Demonstration
Move
Enter
Return
English - 3
Input
-
(depending on the model)
Source List / Edit Name
◆ Source List
TV
You can switch between
TV
AV1
viewing signal from
AV2
Componet - - - -
connected equipment, such
as a VCR, DVD, set-top box,
and the TV source
Move
(broadcast or cable).
➢
You can change the required external source simply
by pressing the SOURCE button on the remote
control. It might take a short period of time for
pictures to be switched. To return to the TV mode,
press the TV button on the remote control.
◆ Edit Name
TV
You can give a name to the
AV1
external source.
AV2
Component : - - - -
Move
Important Warranty Information
Regarding Television Format Viewing
Standard screen format televisions (4:3, the aspect ratio of the
screen width to height) are primarily designed to view standard
format full-motion video.
The images displayed on them should primarily be in the standard
4:3 ratio format and constantly moving. Displaying stationary
graphics and images on screen, such as the dark top and bottom
letterbox bars (wide screen pictures), should be limited to no more
than 15% of the total television viewing per week.
Wide screen format televisions (16:9, the aspect ratio of the screen
width to height) are primarily designed to view wide screen format
full-motion video. The images displayed on them should primarily be
in the wide screen 16:9 ratio format, or expanded to fill the screen if
your model offers this feature, and constantly moving. Displaying
stationary graphics and images on screen, such as the dark side-
bars on non-expanded standard format television video and
programming, should be limited to no more than 15% of the total
television viewing per week.
Additionally, viewing other stationary images and text such as stock
market reports, video game displays, station logos, web sites or
computer graphics and patterns, should be limited as described
above for all televisions. Displaying any stationary images that
exceed the above guidelines can cause uneven aging of picture
tubes (CRTs) that leave subtle, but permanent burned-in ghost
images in the television picture. To avoid this, vary the programming
and images, and primarily display full screen moving images, not
stationary patterns or dark bars.
On television models that offer picture sizing features, use these
controls to view the different formats as a full screen picture.
Be careful in the selection and duration of television formats used for
viewing. Uneven CRT aging as a result of format selection and use,
as well as other burned-in images, is not covered by your Samsung
limited warranty.
Source List
- - - -
- - - -
Enter
Return
Edit Name
: - - - -
----
VCR
: - - - -
DVD
Cable STB
Satellite STB
AV Receiver
DVD Receiver
† †
Enter
Return
Advertisement
Table of Contents
